SPEC: 25055
3/C CSA TECK 90 1000V ALUMINUM POWER CABLE
Three Conductor 1000V Multi Conductor, FT4 - Flame Retardancy Rating, Direct Burial, XLPE Insulation, Aluminum Interlocked Armour, Sunlight Resistant, -40ºC Min, 90ºC Max, Rated HL (Hazardous Locations)
Application
For exposed or concealed wiring in wet or dry locations. For use in ventilated, non-ventilated and ladder type cable troughs and ventilated flexible cableway in wet, dry, hazardous locations or direct buried. Sunlight Resistant. Typical applications are for control. lighting and power circuits in: pulp and paper mills, steel mills, food processing plants, commercial centers, mines, generating stations, refineries, industrial plants and chemical plants. Voltage 1000V CSA / 600V UL.
Specifications
Select a set of products below for more information:
| Cond. Size (AWG/Kcmil) | Cond. Strands | Diameter Over Conductor (in) (cm) | Diameter Over Insulation (in) (cm) | Insulation Thickness (mils) (mm) | Diameter Over Shield (in) (cm) | Ground (No. x AWG) | Inner Jacket Thickness (mils) (mm) | Diameter Over Armor (in) (cm) | Drain Wire | Jacket Thickness (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | Max Pull Tension (lbs) (kg) | Min. Bend Radius (in) (cm) | Conduit Size (in) (cm) | |
| More Options |
500
500
|
35
35
|
0.735
1.87
|
|
90
2.29
|
|
1x1
1x1
|
115
2.92
|
2.565
6.52
|
|
80
2.03
|
2.731
6.94
|
3284
4887
|
9000
4082.33
|
19.1
48.51
|
|
| More Options |
250
250
|
35
35
|
0.520
1.32
|
|
90
2.29
|
|
1x2
1x2
|
115
2.92
|
2.099
5.33
|
|
65
1.65
|
2.231
5.67
|
2104
3131
|
4500
2041.16
|
15.6
39.62
|
|
* Strand count meets minimum number per ASTM
| Cond. Size (AWG/Kcmil) | DC Resistance @ 25C (ohms/1000') (ohms/km) | AC Resistance @ 75C (ohms/1000') (ohms/km) | Capacitive Reactance (Mohms x 1000ft) (Mohms x km) | Inductive Reactance (ohms/1000') (ohms/km) | Zero Sequence Impedance (ohms/1000') (ohms/1000') | Positive Sequence Impedance (ohms/1000') (ohms/1000') | Shield Short Circuit Current 6 Cycles (amps) | Direct Buried Ampacity @ 90C (amps) | Direct Buried Ampacity @ 105C (amps) | In Duct Ampacity @ 90C (amps) | In Duct Ampacity @ 105C (amps) | In Air Ampacity @ 90C (amps) | In Air Ampacity @ 105C (amps) | |
| More Options |
500
500
|
0.035
0.05
|
0.044
0.07
|
|
0.039
0.06
|
|
|
|
|
|
|
|
|
|
| More Options |
250
250
|
0.071
0.11
|
0.086
0.13
|
|
0.041
0.06
|
|
|
|
|
|
|
|
|
|
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
Standards & References
- ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
- ASTM B836 Compact Rounded Stranded Aluminum Conductors
- UL 1569 Metal-Clad Cables
- CSA C22.2 No. 174 Cables in Hazardous Locations
- CSA C22.2 No. 131 Type TECK 90 Cable
- CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
- CSA HL - for Hazardous Locations rating
- CSA SUN RES - for Sunlight Resistant rating
- IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
Construction
- Conductor: Class B compact stranded 8000 Series Aluminum.
- Insulation: Cross-Linked Polyethylene (XLPE), Color Code: Black and numbered
- Grounding Conductors: Uninsulated Aluminum Class B stranded grounding conductor
- Assembly: Polypropylene tape
- Inner Jacket: Black Polyvinyl Chloride (PVC)
- Armor: Aluminum Interlocked Armour (AIA)
- Overall Jacket: Black PVC (optional colours available)
Resources
There are no downloadable resources for this product.