ELECTRICAL AL 600V-UD

Aluminum Conductors. Cross-Linked Polyethylene (XLPE) Insulation.
Download Category Specifications:
Excel Table

Application

Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
554189 3 3 6 AWG 6 AWG 7 7 60 1.52 643 16.35 132 196
554187 3 3 4 AWG 4 AWG 7 7 60 1.52 744 18.91 188 280
554186 4 4 4 AWG 4 AWG 7 7 60 1.52 831 21.13 251 373
554174 3 3 2 AWG 2 AWG 7 7 60 1.52 870 22.11 275 409
554173 4 4 2 AWG 2 AWG 7 7 60 1.52 972 24.71 337 502
554150 3 3 1/0 AWG 1/0 AWG 9 9 80 2.03 1105 28.09 443 660
554148 4 4 1/0 AWG 1/0 AWG 9 9 80 2.03 1235 31.39 535 796
554163 3 3 2/0 AWG 2/0 AWG 11 11 80 2.03 1198 30.45 480 715
554160 4 4 2/0 AWG 2/0 AWG 11 11 80 2.03 1339 34.03 659 981
554176 3 3 3/0 AWG 3/0 AWG 17 17 80 2.03 1302 33.08 579 862
554183 3 3 4/0 AWG 4/0 AWG 18 18 80 2.03 1421 36.10 792 1178
554182 4 4 4/0 AWG 4/0 AWG 18 18 80 2.03 1588 40.35 971 1444
554168 3 3 250 KCMIL 250 KCMIL 22 22 95 2.41 1581 40.16 856 1274
554167 4 4 250 KCMIL 250 KCMIL 22 22 95 2.41 1767 44.88 1176 1751
554179 3 3 350 KCMIL 350 KCMIL 30 30 95 2.41 1794 45.59 1117 1662
554178 4 4 350 KCMIL 350 KCMIL 30 30 95 2.41 2006 50.95 1543 2296
554188 3 3 500 KCMIL 500 KCMIL 37 37 95 2.41 2114 53.71 1602 2383

Standards & References

Southwire’s quadruplex or paralleled 600 volt secondary UD cable meets or exceeds the following ASTM specifications:

  • B230 Aluminum, 1350-H19 Wire for Electrical Purposes
  • B231 Aluminum 1350 Conductors, Concentric-Lay-Stranded

Construction

Conductors are stranded, compressed 1350-H16/H26 aluminum, insulated with cross-linked polyethylene. Neutrals are identified by triple yellow extruded stripe. Cables with “YES” neutrals have sequential footage markers. Conductors are durably surface printed for identification. Three phase conductors and one neutral conductor are cabled together to produce the quadruplex cable configuration.

  • 1350

Resources

There are no downloadable resources for this product.