AL 600V-UD QUADRUPLEX

Aluminum Conductors. Cross-Linked Polyethylene (XLPE) Insulation.

Download Category Specifications

PDF Excel Table

Application

Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts.

Specifications

measurement

imperial metric

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
274324	4 4	4 AWG 4 AWG	7 7	60 1.52			831 21.13	251 374
239657	4 4	2 AWG 2 AWG	7 7	60 1.52			972 24.71	337 502
274365	4 4	1/0 AWG 1/0 AWG	9 9	80 2.03			1235 31.39	535 796
274381	4 4	2/0 AWG 2/0 AWG	11 11	80 2.03			1339 34.03	659 981
274407	4 4	3/0 AWG 3/0 AWG	17 17	80 2.03			1455 36.97	795 1183
274423	4 4	4/0 AWG 4/0 AWG	18 18	80 2.03			1588 40.35	971 1444
611724	4 4	250 KCMIL 250 KCMIL	22 22	95 2.41			1767 44.88	1176 1751
274902	4 4	350 KCMIL 350 KCMIL	30 30	95 2.41			2006 50.95	1543 2296
303727	4 4	500 KCMIL 500 KCMIL	37 37	95 2.41			2363 60.03	2189 3258
144048	4 4	750 KCMIL 750 KCMIL	61 61	110 2.79			2868 72.85	3034 4516

Standards & References

Southwire’s quadruplex or paralleled 600 volt secondary UD cable meets or exceeds the following ASTM specifications:

B230 Aluminum, 1350-H19 Wire for Electrical Purposes
B231 Aluminum 1350 Conductors, Concentric-Lay-Stranded

Construction

Conductors are stranded, compressed 1350-H16/H26 aluminum, insulated with cross-linked polyethylene. Neutrals are identified by triple yellow extruded stripe. Cables with “YES” neutrals have sequential footage markers. Conductors are durably surface printed for identification. Three phase conductors and one neutral conductor are cabled together to produce the quadruplex cable configuration.

1350

Resources

There are no downloadable resources for this product.