2/0 STR 3E AL (67.4mm2) SIMpull(R) XHHW-2/RW90 BROWN 10000 FT SPEC10015 58529689

Southwire #: 58529689

1000 Volts/600 Volts Alumaflex® Brand Aluminum Alloy (AA-8176) Conductor. Cross-linked Polyethylene (XLPE) Insulation. Moisture Resistant High Heat.

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

BLUE

BROWN

GRAY

GREEN

ORANGE

PURPLE

RED

WHITE

YELLOW

Packaging

Application & Features

Southwire® SIMpull XHHW-2® aluminum conductors are primarily used in conduit or recognized raceways for service and feeder wiring as specified in the National Electrical Code. XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating for XHHW-2 conductors is 1000 volts. Suitable for use in Health Care Facilities per section 517.160 of the NEC where a dielectric constant of 3.5 or less may be specified. This product is designed to be installed without the application of pulling lubricant.

Specifications

Cond. Size	2/0 AWG 2/0 AWG
Conductor Number	1 1
Cond. Strands	12 12
Diameter Over Conductor (in) (cm)	0.376 0.96	inch cm
Insulation Thickness (mils) (mm)	55 1.40	mils mm
Approx. OD (in) (cm)	0.492 1.25	inch cm
Aluminum Weight (lbs/1000') (kgs/km)	125 186	lbs/1000' kgs/km
Approx. Weight (lbs/1000') (kgs/km)	163 243	lbs/1000' kgs/km

* Strand count meets minimum number per ASTM
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

Southwire SIMpull® Aluminum Type XHHW-2 conductors comply with the following:

ASTM – B800 and B836
Listed per UL Standard 44
NOM-ANCE 90° C
Federal Specification A-A-59544
National Electrical Code, NFPA 70
NEMA WC-70 (ICEA S-95-658) Construction Requirements
Gas & Oil Resistant II
Sunlight Resistant
CT Rated
FT4
RoHS/Reach Compliant

Construction

Southwire Type XHHW-2 aluminum conductors are Alumaflex® brand AA-8000 series aluminum alloy, compact stranded. The insulation is an abrasion, moisture and heat resistant SIMpull® thermoset cross-linked polyethylene. Marked sunlight resistant.

Resources

Al XHHW EPD

Feeder Solution Flyer

Building Wire & Cable Overview and Amperage

Building Wire Cable Selector Flyer

Aluminum Building Wire Sales Sheet

Building Wire Selection Guide

For technical references, whitepapers, and installation resources please refer to: https://www.southwire.com/services/cabletech-support-services