SPEC: 47210
3/C CU 2000V Type G-GC RHINOFLEXTM CPE Mining Cable 90°C. MSHA Approved
Flexible Copper conductors, Ethylene Propylene Rubber (EPR) insulation, Extra Heavy Duty Two Layer Chlorinated Polyethylene (CPE) Jacket with Optional Reflective Stripes
Application
RHINOFLEX<sup>TM</sup> Type G-G cable is a heavy-duty cable for use where flexibility and maximum protection is required. For use with all portable, temporary, and permanent power applications such as mobile or stationary mining equipment, shuttle cars, mobile drills, pumps, roof bolters, conveyors, and any portable power where equipment grounding is required, It is ideal for use anytime extra-durable, flexible cable is required. Also suitable for continuous submersion in water. Ground check conductor provides fail-safe ground monitoring. Embossed print legend for easy cable identification. Cold Bend and Impact Tested to -50°C.
Specifications
Select a set of products below for more information:
| Cond. Size (AWG/Kcmil) | Conductor Number | Cond. Strands | Diameter Over Conductor (in) (cm) | Insulation Thickness (mils) (mm) | Diameter Over Insulation (in) (cm) | Ground (No. x AWG) | Ground Check Size | Inner Jacket Thickness (mils) (mm) | Jacket Thickness (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | |
| More Options |
8
8
|
3
3
|
168
168
|
0.153
0.39
|
60
1.52
|
0.287
0.73
|
2x10
2x10
|
10
10
|
55
1.40
|
145
3.68
|
1.026
2.61
|
661
984
|
| More Options |
6
6
|
3
3
|
133
133
|
0.198
0.50
|
60
1.52
|
0.336
0.85
|
1x10
1x10
|
10
10
|
55
1.40
|
95
2.41
|
1.050
2.67
|
789
1174
|
| More Options |
4
4
|
3
3
|
259
259
|
0.235
0.60
|
60
1.52
|
0.388
0.99
|
1x8
1x8
|
10
10
|
60
1.52
|
95
2.41
|
1.190
3.02
|
1014
1509
|
| More Options |
2
2
|
3
3
|
308
308
|
0.302
0.77
|
60
1.52
|
0.452
1.15
|
2x7
2x7
|
8
8
|
65
1.65
|
90
2.29
|
1.325
3.37
|
1413
2103
|
| More Options |
2/0
2/0
|
3
3
|
324
324
|
0.400
1.02
|
80
2.03
|
0.594
1.51
|
2x4
2x4
|
8
8
|
85
2.16
|
100
2.54
|
1.636
4.16
|
2401
3573
|
| More Options |
4/0
4/0
|
3
3
|
532
532
|
0.550
1.40
|
80
2.03
|
0.751
1.91
|
1x2
1x2
|
8
8
|
80
2.03
|
135
3.43
|
2.040
5.18
|
3715
5529
|
| More Options |
250
250
|
3
3
|
608
608
|
0.682
1.73
|
100
2.54
|
0.816
2.07
|
1x2
1x2
|
8
8
|
100
2.54
|
120
3.05
|
2.390
6.07
|
4386
6527
|
| More Options |
350
350
|
3
3
|
855
855
|
0.809
2.05
|
100
2.54
|
0.926
2.35
|
2x1/0
2x1/0
|
8
8
|
100
2.54
|
125
3.18
|
2.680
6.81
|
5801
8633
|
^ Orange outer jacket
| Cond. Size (AWG/Kcmil) | DC Resistance @ 25C (ohms/1000') (ohms/km) | AC Resistance @ 75C (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Rated Strength (lbs) (kg) | Min. Bend Radius (in) (cm) | In Air Ampacity @ 90C (amps) | |
| More Options |
8
8
|
0.715
1.06
|
0.903
1.34
|
0.036
0.05
|
112
50.80
|
8.2
20.83
|
59
59
|
| More Options |
6
6
|
0.450
0.67
|
0.568
0.85
|
0.034
0.05
|
179
81.19
|
8.4
21.34
|
79
79
|
| More Options |
4
4
|
0.282
0.42
|
0.356
0.53
|
0.033
0.05
|
285
129.27
|
9.5
24.13
|
104
104
|
| More Options |
2
2
|
0.179
0.27
|
0.226
0.34
|
0.031
0.05
|
453
205.48
|
10.6
26.92
|
138
138
|
| More Options |
2/0
2/0
|
0.090
0.13
|
0.114
0.17
|
0.030
0.04
|
910
412.77
|
13.0
33.02
|
215
215
|
| More Options |
4/0
4/0
|
0.057
0.08
|
0.073
0.11
|
0.029
0.04
|
1447
656.35
|
16.3
41.40
|
287
287
|
| More Options |
250
250
|
0.048
0.07
|
0.062
0.09
|
0.026
0.04
|
1710
775.64
|
19.1
48.51
|
320
320
|
| More Options |
350
350
|
0.035
0.05
|
0.046
0.07
|
0.025
0.04
|
2394
1085.90
|
21.4
54.36
|
394
394
|
* Ampacities based upon ICEA S-75-381 Table H-1.
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
Standards & References
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
- ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
Construction
- Conductor: Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B33/B172
- Separator Tape: Non-conducting tape applied between the conductor and insulation to facilitate stripping and Ethylene Propylene Rubber (EPR), color coded black, white, red.
- Ground Conductors: Two mylar taped, tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172
- Ground Check Conductor: Tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172 with yellow, high durometer, Ethylene Propylene Rubber (EPR) insulation.
- Filler: Filler as needed
- Binder: Binder Tape
- Inner Jacket: Black, mold cured, extra heavy-duty integral fill flame resistant, thermosetting Chlorinated Polyethylene (CPE)
- Reinforcement: Reinforcing twine applied between the two jacket layers
- Outer Jacket: Black, mold cured, extra heavy-duty, modified integral fill, flame resistant, thermosetting Chlorinated Polyethylene (CPE). Alternate jacket colors available
- Reflective Stripe: Highly visible reflective stripe embedded into the outer jacket to increase safety and help prevent cable runover (optional, contact your sales representative for part number)
Resources
There are no downloadable resources for this product.