Metal Clad Cable

Armorlite® Type MC Multi-Circuit

Contact Us PDF Excel Table
Home Products Wire & Cable Metal Clad Cable Armorlite® Type MC Multi-Circuit
Metal Clad Cable

Armorlite® Type MC Multi-Circuit

12/2 AWG Copper THHN/THWN Insulated Singles. Multiple Circuits. Green Insulated Grounding Conductor. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor.
Armorlite® Type MC Multi-Circuit Play Video
  • Armorlite® Type MC Multi-Circuit
Contact Us
Download Category Specifications:
PDF Excel Table

Application

Southwire Armorlite® Type MC Cable - Multi-Circuit is suitable for use as follows:

  • Multiple circuits for branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
  • Fished or embedded in plaster
  • Concealed or exposed installations.
  • Environmental air-handling spaces per NEC 300.22 (C).
  • Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
  • Installation in cable tray and approved raceways
  • Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
  • Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
551322 4 4 12 AWG 12 AWG 19 19 15 0.38 12 12 602 15.29 189 282
555951 5 5 12 AWG 12 AWG 1 1 15 0.38 12 12 574 14.59 179 266
551324 6 6 12 AWG 12 AWG 19 19 15 0.38 12 12 641 16.30 242 360
551354 8 8 12 AWG 12 AWG 19 19 15 0.38 12 12 680 17.27 270 402
589122 10 10 12 AWG 12 AWG 1 1 15 0.38 12 12 693 17.61 303 450
580850 12 12 12 AWG 12 AWG 1 1 15 0.38 12 12 741 18.84 378 563
679370 16 16 12 AWG 12 AWG 1 1 12 12 812 20.62 478 711
641211 18 18 12 AWG 12 AWG 1 1 15 0.38 12 12 812 20.62 495 736
563822 4 4 10 AWG 10 AWG 19 19 20 0.51 10 10 652 16.58 241 358
551336 6 6 10 AWG 10 AWG 19 19 20 0.51 10 10 750 19.07 388 577
586402 7 7 10 AWG 10 AWG 1 1 20 0.51 10 10 714 18.14 301 448
566698 8 8 10 AWG 10 AWG 19 19 20 0.51 10 10 799 20.30 433 645
593174 9 9 10 AWG 10 AWG 1 1 10 10 817 20.77 426 634
585848 10 10 10 AWG 10 AWG 1 1 20 0.51 10 10 817 20.77 493 733
591424 11 11 10 AWG 10 AWG 1 1 10 10 841 21.38 503 748
552986 12 12 10 AWG 10 AWG 1 1 20 0.51 10 10 879 22.33 574 854
679161 16 16 10 AWG 10 AWG 1 1 10 10 967 24.57 733 1091
678254 18 18 10 AWG 10 AWG 19 19 10 10 1023 25.98 845 1258
573528 4 4 8 AWG 8 AWG 19 19 30 0.76 8 8 793 20.14 404 601
573530 6 6 8 AWG 8 AWG 19 19 30 0.76 8 8 857 21.77 538 801
583642 8 8 8 AWG 8 AWG 19 19 30 0.76 8 8 986 25.07 681 1013
640598 12 12 8 AWG 8 AWG 19 19 30 0.76 10 10 1168 29.67 930 1384
677866 8 8 6 AWG 6 AWG 19 19 30 0.76 8 8 1093 27.76 957 1424
557740 null null null null 965 24.51

Standards & References

Southwire's Armorlite® Type MC Cable - Multi-Circuit meets or exceeds the following requirements:

  • UL 83
  • UL 1569
  • UL 1685
  • UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
  • Federal Specification A-A59544 (formerly J-C-30B)
  • NFPA 70 (National Electrical Code), Article 330
  • Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
  • Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) Vertical Cable Tray Flame Test
  • REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire Armorlite® Type MC Cable - Multi-Circuit is constructed with 14 awg through 10 awg softdrawn copper Type THHN/THWN conductors rated 90°C dry, and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. An optional PVC jacket can be applied over the armored assembly.

Resources

There are no downloadable resources for this product.