Ultratite® Type NM is suitable for the following installations:
For the installation and protection of electrical conductors
Motor circuits - for conductors of motor feeders, branch and control circuits.
Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather
Agricultural buildings per NEC® 547.5
Used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment
Exposed or concealed installations
Applications requiring movement, crossover connections, or tight bends
For direct burial and encased in concrete
For flexible connections to swimming pool, spa, and hot tub motors per NEC® 680.21(A)(3) &
680.42(A)(1)
Electric signs and outline lighting supply and secondary-circuit conductors per NEC® 600.7, 600.31 (1000 volts or less) & 600.32 (over 1000 volts)
Floating building feeders and services per NEC® 553.7
Boatyards & Marinas in accordance with NEC® 555.13
Cranes & Hoists in accordance with NEC® 610.11(C)
For Elevator, Dumbwaiters, Escalators, Moving Walks, Wheel Chair Lifts & Stairway Chair Lifts in accordance with NEC® 620.21 (where expressly permitted)
Under raised floors in information technology equipment conductors and cables in accordance with NEC® 645.5 (D) & 645.5(D)(2)
Service entrance in lengths up to six feet per NEC® 230.43(15)
For containment of 600 Volt and lower potential circuits
Approved for use in lengths longer than 6 feet per NEC® 356.10(5)
Motor leads per NEC® 430.145(B)
Hazardous location:
Class I, Div. 2 - NEC® 501.10(B)(2)
Class II, Div. 1 - NEC® 502.10(A)(2)
Class II, Div. 2 - NEC® 502.10(B)(2)
Class III, Div. 1 - NEC® 503.10(A)(2)
Class III, Div. 2 - NEC® 503.10(B)
Ultratite® Type NM Features
A protective combination of thermoplastic materials formed into a conduit/raceway which seals out water, liquids, abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease, mineral acids, non-concentrated fixed alkalines, petroleum oils, salt air and spray, and weather
Smooth interior for easy wire pulling
UV sunlight resistant jacket
Rated for temperature range of -30°C to 80°C , 60°C Oil (-22 to +176, 140°F Oil)
Accepts standard liquid-tight fittings for use with LFNC-B
