SPEC: 13008

Southwire CL4SS™ Class 4 Shielded Outdoor / General Purpose SPEC13008

Download Category Specifications

Application & Features

Intended for use in Fault Managed Power Systems (FMPS), remote powering, indoor Class 4 circuits per 2023 National Electrical Code (NEC) article 726. For use, primarily, in Agriculture, Intelligent Buildings, and Wireless Densification. The power source (transmitter) for Class 4 circuits shall be supplied from a power source that has a voltage output of 450 volts (peak or DC) or less. The CL4Z cables are considered for outdoor use only and are not to be attached to or used within a building structure. Type CL4Z cables comply with the applicable requirements for CL4. The CMG cables can be installed in buildings according to NEC article 722.135 and table 722.135(B).

Ratings:
Normal operating temperature: 90°C
Temperature Range: -40°C to 90°C
Rated Use: Dry or wet locations

Specifications

Select more options below for part numbers, packaging, and color options:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Jacket Thickness (mils) (mm)	Approx. OD (inches) (cm)	Approx. Weight (lbs/1000') (kgs/km)	DC Resistance at 25C (ohms/1000') (ohms/km)	Min. Bend Radius (in) (cm)
More Options	18 AWG 18 AWG	2 2	19 19	0.045 0.11	17 0.43	25 0.64	0.349 0.89	26 39	6.669 9.92	1.4 3.56
More Options	18 AWG 18 AWG	4 4	19 19	0.045 0.11	17 0.43	25 0.64	0.376 0.96	50 74	6.669 9.92	1.5 3.81
More Options	18 AWG 18 AWG	8 8	19 19	0.045 0.11	17 0.43	37 0.94	0.417 1.06	88 131	6.669 9.92	1.7 4.32
More Options	16 AWG 16 AWG	2 2	19 19	0.056 0.14	17 0.43	25 0.64	0.376 0.96	70 104	4.181 6.22	1.5 3.81
More Options	16 AWG 16 AWG	4 4	19 19	0.056 0.14	17 0.43	32 0.81	0.403 1.02	113 168	4.181 6.22	1.6 4.06
More Options	16 AWG 16 AWG	8 8	19 19	0.056 0.14	17 0.43	37 0.94	0.481 1.22	125 186	4.181 6.22	1.9 4.83
More Options	14 AWG 14 AWG	2 2	7 7	0.070 0.18	22 0.56	32 0.81	0.467 1.19	112 167	2.631 3.92	1.9 4.83
More Options	14 AWG 14 AWG	4 4	7 7	0.070 0.18	22 0.56	37 0.94	0.543 1.38	183 272	2.631 3.92	2.2 5.59
More Options	14 AWG 14 AWG	8 8	7 7	0.070 0.18	22 0.56	37 0.94	0.780 1.98	370 551	2.631 3.92	3.1 7.87

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Size AWG	Capacitance pF/ft
18 18	<30 <30
16 16	<30 <30
14 14	<30 <30

2 Pair 1 Black & Red	4 Pair 1 Black & Red	8 Pair 1 Black & Red
2 Black & White 2 Black & White	2 Black & White 2 Black & White	2 Black & White 2 Black & White
	3 Black & Green 3 Black & Green	3 Black & Green 3 Black & Green
	4 Black & Blue 4 Black & Blue	4 Black & Blue 4 Black & Blue
		5 Black & Yellow 5 Black & Yellow
		6 Black & Brown 6 Black & Brown
		7 Black & Orange 7 Black & Orange
		8 Black & White 8 Black & White

CondutorSize Green	Numberof Pairs Black	JacketColor White	AWG	num
18 18	2 2	CL4Z182S0605	CL4Z182S0608	CL4Z182S0601
18 18	4 4	CL4Z184S0605	CL4Z184S0608	CL4Z184S0601
18 18	8 8	CL4Z188S0605	CL4Z188S0608	CL4Z188S0601
16 16	2 2	CL4Z162S0605	CL4Z162S0608	CL4Z162S0601
16 16	4 4	CL4Z164S0605	CL4Z164S0608	CL4Z164S0601
16 16	8 8	CL4Z168S0605	CL4Z168S0608	CL4Z168S0601
14 14	2 2	CL4Z142S0605	CL4Z142S0608	CL4Z142S0601
14 14	4 4	CL4Z144S0605	CL4Z144S0608	CL4Z144S0601
14 14	8 8	CL4Z148S0605	CL4Z148S0608	CL4Z148S0601

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 1400-2 Fault-Managed Power Systems - Part 2: Requirements for Cables
UL 444 Communications Cables

Construction

Conductor:Class B or C stranded soft-drawn bare copper per ASTM B3 and B8
Insulation:Twisted pair(s) with premium grade, lead-free, flame-retardant, Polyvinyl Chloride (PVC). See Table 4 for pair(s) numbers and colors.
ShieldAluminum foil shield
Jacket: Lead-free, flame-retardant, LS, Polyvinyl Chloride (PVC). See Table 5 for available jacket colors.

Resources

There are no downloadable resources for this product.