SPEC: 45503

TCU 2000V NLEPR Insulation Thermoset LSZH-TS Jacket. RHH/RHW-2 SPEC45503

Power Cable 2000 Volt Single Conductor Copper or Tinned Copper, Ethylene Propylene Rubber (EPR) insulation RHH/RHW-2 Thermoset SOLONON® (LSZH-TS) Jacket

Download Category Specifications

Application & Features

Southwire’s 2000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502.

Specifications

Select more options below for part numbers, packaging, and color options:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Jacket Thickness (mils) (mm)	Approx. OD (in) (cm)	Copper Weight (lbs/1000') (kgs/km)	Approx. Weight (lbs/1000') (kgs/km)
More Options	1/0 AWG 1/0 AWG	1 1	19 19	0.362 0.92	65 1.65	45 1.14	0.598 1.52	326 485	428 637
More Options	250 KCMIL 250 KCMIL	1 1	259 259	0.610 1.55	105 2.67	65 1.65	0.972 2.47	811 1207	1069 1591
More Options	500 KCMIL 500 KCMIL	1 1	259 259	0.890 2.26	105 2.67	65 1.65	1.252 3.18	1579 2350	1924 2863
More Options	750 KCMIL 750 KCMIL	1 1	61 61	0.968 2.46	90 2.29	65 1.65	1.297 3.29	2316 3447	2650 3944
More Options	750 KCMIL 750 KCMIL	1 1	127 127	0.968 2.46	90 2.29	65 1.65	1.300 3.30	2315 3445	2652 3947
More Options	1000 KCMIL 1000 KCMIL	1 1	127 127	1.118 2.84	90 2.29	65 1.65	1.450 3.68	3088 4595	3468 5161
More Options	2000 KCMIL 2000 KCMIL	1 1	127 127	1.583 4.02	115 2.92	95 2.41	2.031 5.16	6175 9189	6903 10273

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	Conductor Number	Min. Bend Radius (in) (cm)	Max Pull Tension (lbs) (kg)	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity Raceway 75C	Allowable Ampacity Raceway 90C
More Options	1/0 AWG 1/0 AWG	1 1	4.7 11.94	845 383.29	0.102 0.15	0.122 0.18	0.044 0.07	150 150	170 170
More Options	250 KCMIL 250 KCMIL	1 1	7.8 19.81	2000 907.18	0.043 0.06	0.053 0.08	0.041 0.06	255 255	290 290
More Options	500 KCMIL 500 KCMIL	1 1	10.0 25.40	4000 1814.37	0.022 0.03	0.029 0.04	0.039 0.06	380 380	430 430
More Options	750 KCMIL 750 KCMIL	1 1	10.2 25.91	6000 2721.55	0.014 0.02	0.022 0.03	0.038 0.06	475 475	535 535
More Options	750 KCMIL 750 KCMIL	1 1	10.4 26.42	6000 2721.55	0.014 0.02	0.022 0.03	0.038 0.06	475 475	535 535
More Options	1000 KCMIL 1000 KCMIL	1 1	11.6 29.46	8000 3628.74	0.011 0.02	0.018 0.03	0.037 0.06	545 545	615 615
More Options	2000 KCMIL 2000 KCMIL	1 1	16.0 40.64	10000 4535.92	0.005 0.01	0.016 0.02	0.034 0.05	665 665	750 750

* Ampacities based upon 2023 NEC Table 310.16. See NEC sections 310.15 and 110.14(C) for additional requirements.
* Inductive Reactance is based on non-ferrous conduit with one diameter spacing center-to-center.

Standards & References

ASTM B8 Concentric-Lay-Stranded Copper Conductors
ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
ASTM B173 Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members
UL 44 Thermoset-Insulated Wires and Cables
UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems (250kcmil & Larger)
NFPA 502 Standard for Road Tunnels, Bridges, and Other Limited Access Highways (non-emergency circuits only)
AREMA 10.3.13 Recommended Design Criteria for Low-Smoke Halogen Free (LSHF) Polymeric Cable Jackets

Construction

Conductor:Stranded tinned copper per ASTM B33 and B8, B172, or B173
Binder Tape:Mylar tape
Insulation:Ethylene Propylene Rubber (EPR)
Overall Jacket:Cross-linked/Thermoset SOLONON® Low Smoke Zero Halogen (LSZH-TS)

Resources

There are no downloadable resources for this product.