SPEC 45265 AL 600/1000V XLPE Insulation PVC Jacket XHHW-2. CT Rated -Sunlight Resistant - For Direct Burial - Silicone Free

Type TC-ER Power Cable 600Volt Four Conductor Aluminum, Cross Linked Polyethylene (XLPE) insulation XHHW-2 Polyvinyl Chloride (PVC) Jacket with 1 Bare AL Ground. Silicone Free.

Download Category Specifications

Application

Southwire’s 600 Volt Type TC-ER power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Silicone free.

Specifications

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil) (mm2)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
583727	4 4	4/0 AWG 4/0 AWG	19 19	55 1.40	2 2		1572 39.93	1407 2093
582123	4 4	250 KCMIL 250 KCMIL	22 22	65 1.65	1 1		1789 45.44	1746 2598
582124	4 4	350 KCMIL 350 KCMIL	35 35	65 1.65	1/0 1/0		2045 51.94	2328 3464
578537	4 4	400 KCMIL 400 KCMIL	35 35	65 1.65	1 1		2124 53.97	2520 3750
578536	4 4	500 KCMIL 500 KCMIL	35 35	65 1.65	1 1		2310 58.69	2973 4424
582127	4 4	600 KCMIL 600 KCMIL	58 58	80 2.03	350 350		2687 68.26	3999 5951

Standards & References

ASTM B801: Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
ASTM B836: Compact Rounded Stranded Aluminum Conductors
UL 44: Thermoset-Insulated Wires and Cables
UL 1277: Electrical Power and Control Tray Cables
UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
ICEA S-58-679: Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)
ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

Construction

Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2
Grounding Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Filler: Paper filler (cable size 8 & 6 uses Polypropylene filler)
Binder: Polyester flat thread binder tape for cable sizes larger than 2 AWG
Overall Jacket: Polyvinyl Chloride (PVC) Jacket