SPEC: 25070

DURATRAY™ CU 600V XLPE Insulation. RHH/RHW-2/RW90 UL & CSA

Single Copper Conductors, XLPE Insulation, Sunlight Resistant, 600V, 90ºC MAX, -40ºC MIN, Gasoline & Oil Resistant

Download Category Specifications

Application & Features

Suitable for installation in Cable Trays, Underground Duct Banks - As per CE Code limitations (see Rule 12-2202) for grounding and bonding applications. Standard colour is black. Some sizes may be availabe in white, red, blue, yellow, brown, orange or grey. Green DuragroundTM also available.

Specifications

Select a set of products below for more information:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Approx. OD (in) (cm)	Copper Weight (lbs/1000') (kgs/km)	Approx. Weight (lbs/1000') (kgs/km)
More Options	1/0 AWG 1/0 AWG	1 1	19 19	0.361 0.92	80 2.03	0.528 1.34	326 485	395 588
More Options	2/0 AWG 2/0 AWG	1 1	19 19	0.405 1.03	80 2.03	0.572 1.45	410 610	487 725
More Options	3/0 AWG 3/0 AWG	1 1	19 19	0.456 1.16	80 2.03	0.622 1.58	518 771	602 896
More Options	4/0 AWG 4/0 AWG	1 1	19 19	0.512 1.30	80 2.03	0.666 1.69	653 972	745 1109
More Options	500 KCMIL 500 KCMIL	1 1	37 37	0.789 2.00	95 2.41	0.966 2.45	1543 2296	1705 2537
More Options	750 KCMIL 750 KCMIL	1 1	61 61	0.968 2.46	110 2.79	1.200 3.05	2315 3445	2549 3793
More Options	1000 KCMIL 1000 KCMIL	1 1	61 61	1.117 2.84	110 2.79	1.349 3.43	3087 4594	3354 4991

†Ampacities derived from the 2015 Canadian Electrical Code - Table 1 - For single conductor in free air and based on an ambient temperature of 30°C. - Table 2 - for Cable in Conduit. Not more than 3 aluminum conductors in a conduit and based on an ambient temperature of 30°C.

	Cond. Size	Conductor Number	Min. Bend Radius (in) (cm)	Max Pull Tension (lbs) (kg)	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity Raceway 75C	Allowable Ampacity Raceway 90C
More Options	1/0 AWG 1/0 AWG	1 1	2.1 5.33	844 382.83	0.102 0.15	0.122 0.18	0.044 0.07	150 150	170 170
More Options	2/0 AWG 2/0 AWG	1 1	2.2 5.59	1064 482.62	0.081 0.12	0.097 0.14	0.043 0.06	175 175	195 195
More Options	3/0 AWG 3/0 AWG	1 1	2.4 6.10	1342 608.72	0.064 0.10	0.078 0.12	0.042 0.06	200 200	225 225
More Options	4/0 AWG 4/0 AWG	1 1	2.6 6.60	1692 767.48	0.051 0.08	0.062 0.09	0.041 0.06	230 230	260 260
More Options	500 KCMIL 500 KCMIL	1 1	3.8 9.65	4000 1814.37	0.022 0.03	0.029 0.04	0.039 0.06	380 380	430 430
More Options	750 KCMIL 750 KCMIL	1 1	6.0 15.24	6000 2721.55	0.014 0.02	0.022 0.03	0.038 0.06	475 475	535 535
More Options	1000 KCMIL 1000 KCMIL	1 1	6.7 17.02	8000 3628.74	0.011 0.02	0.018 0.03	0.037 0.06	545 545	615 615

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Size	BLACK	WHITE	RED	BLUE	YELLOW	BROWN	ORANGE	GREY
1/0 1/0	649139	649132 649132	649134 649134	649136 649136	TBA TBA	TBA TBA	TBA TBA	TBA TBA
2/0 2/0	649088	649081 649081	649083 649083	649085 649085	TBA TBA	TBA TBA	TBA TBA	TBA TBA
3/0 3/0	649148	649141 649141	649143 649143	649146 649146	TBA TBA	TBA TBA	TBA TBA	TBA TBA
4/0 4/0	649097	649090 649090	649092 649092	649094 649094	TBA TBA	TBA TBA	TBA TBA	TBA TBA
250Kcmil 250Kcmil	TBA TBA	TBA TBA	TBA TBA	TBA TBA	TBA TBA	TBA TBA	TBA TBA	TBA TBA
350Kcmil 350Kcmil	649107	649109 649109	649102 649102	649105 649105	TBA TBA	TBA TBA	TBA TBA	TBA TBA
500Kcmil 500Kcmil	649045	649110 649110	649113 649113	649115 649115	TBA TBA	TBA TBA	TBA TBA	TBA TBA
750Kcmil 750Kcmil	649048	649117 649117	649119 649119	649121 649121	TBA TBA	TBA TBA	TBA TBA	TBA TBA
1000Kcmil 1000Kcmil	649130	649123 649123	649125 649125	649127 649127	TBA TBA	TBA TBA	TBA TBA	TBA TBA

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
CSA C22.2 No. 38 Thermoset-insulated wires and cables
CSA C22.2 No.230 Tray Cables - Rated TC-ER (1/0 AWG and Larger)
CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA SUN RES - for Sunlight Resistant rating
CSA ST1 Smoke Test - marked FT4-ST1 (1/0 and Larger)
Oil Res I & Sun Res - AWG 8 & Larger

Construction

Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Insulation: Cross Linked Polyethylene (XLPE)

Resources

There are no downloadable resources for this product.