SPEC: 47011

CU 600V Remote Power & Drill Cord Cable 90°C. MSHA Approved

Flexible Copper conductors, Ethylene Propylene Diene Monimor (EPDM) insulation, Extra Heavy Duty Two Layer Heavy-Duty Neoprene Jacket with Optional Reflective Stripes

Download Category Specifications
PDF Excel Table

Application

Southwire’s Remote Power and Drill cord cable is a heavy-duty cable for use where limited flexing and rugged use are re- quired. For use in stationary heavy duty pumps or long-wall lighting application. Designed for long service life in wet or dry locations in underground mines. The cable is sunlight resistant, crush resistant, and abrasion resistant. Also suitable for continuous submersion in water. Embossed print legend for easy cable identification.

Specifications

Select a set of products below for more information:
Cond. Size (AWG/Kcmil) Conductor Number Cond. Strands Diameter Over Conductor (in) (cm) Insulation Thickness (mils) (mm) Diameter Over Insulation (in) (cm) Ground (No. x AWG) Ground Check Size Ground Check Strands Ground Insulation Thickness (mils) (mm) Inner Jacket Thickness (mils) (mm) Diameter Over Armor (in) (cm) Jacket Thickness (mils) (mm) Approx. OD (in) (cm) Approx. Weight (lbs/1000') (kgs/km)
More Options
14 14
4.0 4.0
41 41
0.073 0.19
45 1.14
0.167 0.42
65 1.65
85 2.16
0.710 1.80
278 414
More Options
12 12
5.0 5.0
65 65
0.094 0.24
45 1.14
0.184 0.47
65 1.65
100 2.54
0.830 2.11
398 592
More Options
12 12
6.0 6.0
65 65
0.094 0.24
45 1.14
0.184 0.47
65 1.65
100 2.54
0.890 2.26
458 682
More Options
10 10
5.0 5.0
104 104
0.117 0.30
45 1.14
0.205 0.52
65 1.65
95 2.41
0.900 2.29
492 732
More Options
8 8
5.0 5.0
71 71
0.153 0.39
60 1.52
0.275 0.70
65 1.65
95 2.41
1.090 2.77
716 1066
Cond. Size (AWG/Kcmil) DC Resistance @ 25C (ohms/1000') (ohms/km) AC Resistance @ 75C (ohms/1000') (ohms/km) Capacitive Reactance (Mohms x 1000ft) (Mohms x km) Inductive Reactance (ohms/1000') (ohms/km) Rated Strength (lbs) (kg) Max Pull Tension (lbs) (kg) Min. Bend Radius (in) (cm) In Air Ampacity @ 60C (amps) In Air Ampacity @ 75C (amps) In Air Ampacity @ 90C (amps) In Air Ampacity @ 105C (amps) Raceway Ampacity @ 75C (amps) Raceway Ampacity @ 90C (amps)
More Options
14 14
2.814 4.19
3.555 5.29
0.041 0.06
28 12.70
5.6 14.22
15 15
More Options
12 12
1.774 2.64
2.241 3.33
0.037 0.06
44 19.96
6.6 16.76
20 20
More Options
12 12
1.774 2.64
2.241 3.33
0.037 0.06
44 19.96
7.1 18.03
20 20
More Options
10 10
1.111 1.65
1.404 2.09
0.035 0.05
70 31.75
7.2 18.29
25 25
More Options
8 8
0.715 1.06
0.903 1.34
0.035 0.05
112 50.80
8.7 22.10
35 35

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Standards & References

  • ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
  • ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
  • ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines

Construction

  1. Conductor: Soft drawn, annealed, flexible, rope-lay stranded, uncoated copper per ASTM B3/B172.
  2. Separator Tape: Non-conducting tape applied as needed between the conductor and insulation to facilitate stripping
  3. Insulation: Ethylene Propylene Rubber (EPR). Color coded: 3-Conductor: Black, White, Green; 4 Conductor: Black, White, Red, Green; 5-Conductor: Black, White, Red, Green, Orange; 6-Conductor: Black, White, Red, Green, Orange, Blue
  4. Filler: Fillers as needed
  5. Inner Jacket: Black, heavy-duty integral fill flame resistant, thermosetting Neoprene
  6. Reinforcement: Reinforcing twine applied between the two jacket layers.
  7. Outer Jacket: Black, heavy-duty, integral fill, flame resistant, thermosetting Neoprene. Alternate jacket colors available.

Resources

There are no downloadable resources for this product.