Armorlite™ Feeder Metal Clad Cable with Copper THHN Conductors

500-3 STR CU THHN BROWN/ORANGE/YELLOW/#1/0 GREEN GROUND GSIA MC 600V MC68 64458899

Southwire #: 64458899

Suitable for use as follows:

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

NATURAL

Conductor Color

Packaging

Armorlite™ Feeder Metal Clad Cable with Copper THHN Conductors

Application & Features

500/3 AWG Copper THHN Insulated Singles. Copper Grounding Conductor. UL Listed. 600 Volts. Rated VW-1. Galvanized Steel Interlocked Armor.

Feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
Fished or embedded in plaster.
Concealed or exposed installations.
Environmental air-handling spaces per NEC 300.22 (C).
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

Size (AWG or kcmil) (mm2)	500 KCMIL 500 KCMIL
No. of Conductors	3 3
Stranding	Stranded Stranded
Nom. OD (mils) (mm)	2275 57.79	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	6270 9330	lbs/1000' kgs/km
Size (AWG)	1/0 1/0
Ground Size UOM	AWG AWG
Conductor Colors	BRN/ORG/YLW/1/0 GRN GND BRN/ORG/YLW/1/0 GRN GND

Standards & References

Southwire's Armorlite® Type MC Cable - Multi-Circuit meets or exceeds the following requirements:

UL 83
UL 1569
UL 1685
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
Federal Specification A-A59544 (formerly J-C-30B)
NFPA 70 (National Electrical Code), Article 330
Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) Vertical Cable Tray Flame Test
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire Steel Armor Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN-2 conductors rated 90°C dry, and a bare copper grounding conductor for sizes 1/0 AWG and larger. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Steel interlocking armor is applied over the assembly. Also available in steel. Conductors are black with phase identification. Colors available upon request with economic order quantity.

Resources

There are no downloadable resources for this product.