Alumaflex™ Type MC AL Feeder XHHW-2 Conductors

Application

Suitable for use as follows:

Branch, feeder and service power distribution under high ambient temperatures in commercial, industrial, institutional, and multi-residential buildings.
Power, lighting, control, and signal circuits.
Fished or embedded in plaster.
Concealed or exposed installations.
Environmental air-handling spaces per NEC 300.22 (C).
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
Installation in cable tray and approved raceways
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

measurement

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
641786	3 3	6 AWG 6 AWG	7 7	45 1.14	6 6		777 19.75	228 339
611203	4 4	6 AWG 6 AWG	7 7	45 1.14	6 6		843 21.42	275 410
600742	3 3	4 AWG 4 AWG	7 7		6 6		956 24.28	303 451
608364	4 4	4 AWG 4 AWG	7 7	45 1.14	6 6		949 24.11	360 535
557199	3 3	2 AWG 2 AWG	6 6	45 1.14	4 4		1089 27.66	417 620
557249	4 4	2 AWG 2 AWG	6 6	45 1.14	4 4		1250 31.75	521 775
558064	3 3	1 AWG 1 AWG	8 8	55 1.40	4 4		1101 27.98	489 728
559963	4 4	1 AWG 1 AWG	8 8		4 4		1205 30.61	609 907
641793	3 3	1/0 AWG 1/0 AWG	10 10		4 4		1181 30.01	570 848
641717	4 4	1/0 AWG 1/0 AWG	10 10		4 4		1294 32.88	716 1065
564886	3 3	2/0 AWG 2/0 AWG	12 12	55 1.40	4 4		1267 32.20	686 1021
641724	4 4	2/0 AWG 2/0 AWG	12 12		4 4		1391 35.34	848 1263
641798	3 3	3/0 AWG 3/0 AWG	15 15		4 4		1369 34.78	792 1178
641730	4 4	3/0 AWG 3/0 AWG	15 15		4 4		1604 40.76	1084 1613
641800	3 3	4/0 AWG 4/0 AWG	19 19		2 2		1581 40.17	1043 1552
641736	4 4	4/0 AWG 4/0 AWG	19 19		2 2		1730 43.95	1314 1955
641802	3 3	250 KCMIL 250 KCMIL	22 22		2 2		1722 43.74	1214 1807
641743	4 4	250 KCMIL 250 KCMIL	22 22		1 1		1887 47.93	1552 2309
641805	3 3	300 KCMIL 300 KCMIL	35 35	65 1.65	2 2		1830 46.48	1391 2070
641750	4 4	300 KCMIL 300 KCMIL	35 35	65 1.65	1 1		2007 51.00	1786 2657
641807	3 3	350 KCMIL 350 KCMIL	35 35		2 2		1929 49.01	1565 2329
641757	4 4	350 KCMIL 350 KCMIL	35 35		1/0 1/0		2118 53.82	2032 3025
643393	3 3	400 KCMIL 400 KCMIL	35 35		1 1		2022 51.36	1753 2609
641764	4 4	400 KCMIL 400 KCMIL	35 35		1/0 1/0		2222 56.46	2258 3361
643396	3 3	500 KCMIL 500 KCMIL	35 35	65 1.65	1 1		2188 55.59	2094 3116
641770	4 4	500 KCMIL 500 KCMIL	35 35	65 1.65	2/0 2/0		2408 61.18	2734 4069
643398	3 3	750 KCMIL 750 KCMIL	58 58	80 2.03	1/0 1/0		2624 66.67	3026 4503
641776	4 4	750 KCMIL 750 KCMIL	58 58	80 2.03	3/0 3/0		2896 73.56	3966 5902
677592	4 4	1000 KCMIL 1000 KCMIL	61 61	80 2.03	600 600		3563 90.50	5523 8219

Standards & References

Southwire AlumaFlex™ Type MC-XHHW-2 Cable meets or exceeds the requirements:

UL 44
UL 1569
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
ICEA S-95-658 (NEMA WC70)
Federal Specification A-A59544 (formerly J-C-30B)
IEEE 1202 (70,000 Btu/hr) Vertical Cable Tray Flame Test
NFPA 70 (National Electrical Code), Article 330
Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire AlumaFlex™Type MC-XHHW-2 Cable with Triple E™Aluminum Alloy is constructed with Type XHHW-2 conductors rated 90˚ C dry, and a bare equipment grounding conductor. Conductors are AlumaFlex™ AA-8000 series aluminum alloy compact stranded. A binder tape is wrapped over the conductors. Aluminum interlocking armor is applied over the assembly. Refer to color chart for conductor color sequence.

Resources

There are no downloadable resources for this product.