Alumaflex™ Type MC AL Feeder XHHW-2 Conductors

2/3 AWG AlumaFlex™ XHHW-2 Insulated Singles with 8000 series Triple E™ Aluminum Alloy. Bare AlumaFlex™ Aluminum Alloy Grounding Conductor. UL Listed. 600 Volts. Lightweight Aluminum Interlocked Armor

Download Category Specifications
PDF Excel Table

Application

Suitable for use as follows:

  • Branch, feeder and service power distribution under high ambient temperatures in commercial, industrial, institutional, and multi-residential buildings.
  • Power, lighting, control, and signal circuits.
  • Fished or embedded in plaster.
  • Concealed or exposed installations.
  • Environmental air-handling spaces per NEC 300.22 (C).
  • Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
  • Installation in cable tray and approved raceways
  • Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
  • Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
641786
3 3
6 AWG 6 AWG
7 7
45 1.14
6 6
839 21.33
242 360
611203
4 4
6 AWG 6 AWG
7 7
45 1.14
6 6
925 23.50
296 440
600742
3 3
4 AWG 4 AWG
7 7
45 1.14
6 6
956 24.28
315 469
608364
4 4
4 AWG 4 AWG
7 7
45 1.14
6 6
1036 26.32
382 569
557199
3 3
2 AWG 2 AWG
6 6
45 1.14
4 4
1082 27.49
417 621
557249
4 4
2 AWG 2 AWG
6 6
45 1.14
4 4
1184 30.09
530 789
558064
3 3
1 AWG 1 AWG
8 8
55 1.40
4 4
1101 27.98
491 731
559963
4 4
1 AWG 1 AWG
8 8
55 1.40
4 4
1322 33.59
647 963
641793
3 3
1/0 AWG 1/0 AWG
10 10
55 1.40
4 4
1154 29.31
569 847
641717
4 4
1/0 AWG 1/0 AWG
10 10
55 1.40
4 4
1296 32.93
740 1102
564886
3 3
2/0 AWG 2/0 AWG
12 12
55 1.40
4 4
1405 35.70
711 1058
641724
4 4
2/0 AWG 2/0 AWG
12 12
55 1.40
4 4
1382 35.12
875 1302
641798
3 3
3/0 AWG 3/0 AWG
15 15
55 1.40
4 4
1311 33.31
786 1170
641730
4 4
3/0 AWG 3/0 AWG
15 15
55 1.40
4 4
1584 40.24
1113 1656
641800
3 3
4/0 AWG 4/0 AWG
19 19
55 1.40
2 2
1538 39.09
1037 1543
641736
4 4
4/0 AWG 4/0 AWG
19 19
55 1.40
2 2
1726 43.85
1357 2019
641802
3 3
250 KCMIL 250 KCMIL
22 22
65 1.65
2 2
1656 42.08
1204 1792
641743
4 4
250 KCMIL 250 KCMIL
22 22
65 1.65
1 1
1883 47.84
1601 2382
641750
4 4
300 KCMIL 300 KCMIL
35 35
65 1.65
1 1
1991 50.58
1841 2740
641807
3 3
350 KCMIL 350 KCMIL
35 35
65 1.65
2 2
1830 46.49
1549 2306
641757
4 4
350 KCMIL 350 KCMIL
35 35
65 1.65
1/0 1/0
2110 53.61
2092 3113
641764
4 4
400 KCMIL 400 KCMIL
35 35
65 1.65
1/0 1/0
2203 55.97
2333 3472
641770
4 4
500 KCMIL 500 KCMIL
35 35
65 1.65
2/0 2/0
2391 60.75
2805 4174
641776
4 4
750 KCMIL 750 KCMIL
58 58
80 2.03
3/0 3/0
2853 72.47
4096 6096
678392
4 4
1000 KCMIL 1000 KCMIL
61 61
80 2.03
600 600
3418 86.82
5635 8386

Standards & References

Southwire AlumaFlex™ Type MC-XHHW-2 Cable meets or exceeds the requirements:

  • UL 44
  • UL 1569
  • UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
  • ICEA S-95-658 (NEMA WC70)
  • Federal Specification A-A59544 (formerly J-C-30B)
  • IEEE 1202 (70,000 Btu/hr) Vertical Cable Tray Flame Test
  • NFPA 70 (National Electrical Code), Article 330
  • Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems
  • REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire AlumaFlex™Type MC-XHHW-2 Cable with Triple E™Aluminum Alloy is constructed with Type XHHW-2 conductors rated 90˚ C dry, and a bare equipment grounding conductor. Conductors are AlumaFlex™ AA-8000 series aluminum alloy compact stranded. A binder tape is wrapped over the conductors. Aluminum interlocking armor is applied over the assembly. Refer to color chart for conductor color sequence.

Resources

There are no downloadable resources for this product.