SPEC 46003 CU Compressed EPR Insulation 100% IL LSZH-TS Jacket. MV 90

Type MV-90 Single Conductor Copper, Ethylene Propylene Rubber (EPR) Thermoset SOLONON® Low Smoke Zero Halogen (LSZH-TS) Jacket. Silicone Free

Download Category Specifications

Application

Southwire’s 2.4KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation, 130°C for emergency overload, and 250°C for short circuit conditions. Rated at -25°C for cold bend. Rated for 1000 lbs./FT maximum sidewall pressure. Silicone Free.

Specifications

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil) (mm2)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
958546	1 1	2 AWG 2 AWG	7 7	125 3.18			741 18.82	428 637
611178	1 1	500 KCMIL 500 KCMIL	37 37	140 3.56			1332 33.83	2091 3111

Standards & References

ASTM B3: Soft or Annealed Copper Wire
ASTM B8: Concentric-Lay-Stranded Copper Conductors
ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
UL 1072: Medium-Voltage Power Cables
UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
ICEA S-96-659: (NEMA WC 71) 2001-5000 V Nonshielded Cables
CT USE: Sizes 1/0 AWG and Larger
Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Construction

Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Conductor Shield: Semi-conducting cross-linked copolymer
Insulation: Ethylene Propylene Rubber (EPR)
Overall Jacket: Thermoset SOLONON® Low Smoke Zero Halogen (LSZH-TS)