2-7 CU 125 MILS EPR 2400V N/S WET/DRY SOLONON-TS JACKET (5kV NON-UL)

Southwire #: 95854699

Type MV-90 Single Conductor Copper, Ethylene Propylene Rubber (EPR) Thermoset SOLONON® Low Smoke Zero Halogen (XL-LSZH) Jacket. Silicone Free

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

Packaging

Application

Southwire’s 2.4KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation, 130°C for emergency overload, and 250°C for short circuit conditions. Rated at -25°C for cold bend. Rated for 1000 lbs./FT maximum sidewall pressure. Silicone Free.

Specifications

Cond. Size (AWG/Kcmil)	2 2
Cond. Strands	7 7
Diameter Over Conductor (in) (cm)	0.282 0.72	inch cm
Diameter Over Insulation (in) (cm)	0.57 1.45	inch cm
Insulation Thickness (mils) (mm)	125 3.18	mils mm
Jacket Thickness (mils) (mm)	80 2.03	mils mm
Approx. OD (in) (cm)	0.741 1.88	inch cm
Approx. Weight (lbs/1000') (kgs/km)	426 634	lbs/1000' kgs/km
Max Pull Tension (lbs) (kg)	530 240.40	lbs kg
Min. Bend Radius (in) (cm)	5.9 14.99	inch cm
Conduit Size (in) (cm)	2.5 6.35	inch cm

* Conduit size based on 3 phase 40% fill-factor without ground
* #2 awg non "LS" rated

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
UL 1072 Medium-Voltage Power Cables
UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
ICEA S-96-659 (NEMA WC 71) 2001-5000 V Nonshielded Cables
CT USE Sizes 1/0 AWG and Larger
Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Construction

Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Conductor Shield: Semi-conducting cross-linked copolymer
Insulation: Ethylene Propylene Rubber (EPR)
Overall Jacket: Thermoset SOLONON® Low Smoke Zero Halogen (LSZH-TS)