12-19 SD CU SIMpull (TM) THHN-THWN-2 MTW-AWM RED 1000 FT
Southwire #: 58019804
600 Volts. Copper Conductor. Thermoplastic Insulation/Nylon Sheath, Heat, Moisture, Gasoline and Oil Resistant II. Rated both THHN and THWN-2. Also rated MTW and AWM. SIMpull® Technology for easier pulling.
Application
SIMpull THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 volts. SIMpull THHN copper conductors are designed to be installed without application of a pulling lubricant.
- THWN-2 Wet locations not to exceed 75° C or dry locations not to exceed 90° C or locations not to exceed 75° C when exposed to oil.
Specifications
| Size (AWG or kcmil) (mm2) | 12 AWG 12 AWG | |
| No. of Conductors | 1 1 | |
| No. of Strands | 19 19 | |
| Nom. OD (mils) (mm) | 132 3.35 | mils mm |
| Insulation Thickness (mils) (mm) | 15 0.38 | mils mm |
| Jacket Thickness (mils) (mm) | 5 0.13 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 25 37 | lbs/1000' kgs/km |
| Allowable Ampacity at 60C | 20 20 | |
| Allowable Ampacity at 75C | 20 20 | |
| Allowable Ampacity at 90C | 20 20 | |
| UPC # | 032886940668 032886940668 |
Standards & References
Southwire® SIMpull THHN® copper conductors comply with the following:
- ASTM - B3
- UL Standards 83 and 758
- CSA C22.2 No. 75
- NOM-ANCE 90° C
- Federal Specification A-A-59544
- National Electrical Code, NFPA 70
- VW-1
- FT1
- MTW
- RoHS/REACH Compliant
Construction
Southwire® SIMpull THHN® copper conductors are made with soft drawn copper. Combination-unilay stranding. The wire is covered with a tough heat and moisture resistant PVC insulation with an overall nylon jacket utilizing SIMpull® Technology. Marked as THWN-2.