SPEC: 22061

RW90 Copper Circuit Sizes (14, 12 & 10 AWG) SPEC22061

Copper Conductor, 600V, 90°C MAX, -40°C MIN. Sunlight Resistant in Black Only.

Download Category Specifications

Application & Features

Single copper conductor with low temperature, moisture resisting XLPE (cross linked polyethylene) insulation. Sunlight Resistant in black only. This product meets the current RoHS requirements. No lead is added or used in manufacturing.

Specifications

Select a set of products below for more information:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Approx. OD (in) (cm)	Copper Weight (lbs/1000') (kgs/km)	Approx. Weight (lbs/1000') (kgs/km)
More Options	14 AWG 14 AWG	1 1	Solid Solid	0.064 0.16	30 0.76	0.128 0.33	12 18	16 24
More Options	14 AWG 14 AWG	1 1	7 7	0.070 0.18	30 0.76	0.135 0.34	12 18	17 25
More Options	12 AWG 12 AWG	1 1	Solid Solid	0.080 0.20	30 0.76	0.144 0.37	19 28	24 36
More Options	12 AWG 12 AWG	1 1	7 7	0.088 0.22	30 0.76	0.153 0.39	20 30	25 37
More Options	10 AWG 10 AWG	1 1	Solid Solid	0.101 0.26	30 0.76	0.165 0.42	31 46	37 55
More Options	10 AWG 10 AWG	1 1	7 7	0.113 0.29	30 0.76	0.177 0.45	32 48	39 58

†Ampacities derived from the 2015 Canadian Electrical Code - Table 1 - For single conductor in free air and based on an ambient temperature of 30°C. - Table 2 - for Cable in Conduit. Not more than 3 aluminum conductors in a conduit and based on an ambient temperature of 30°C.
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	Conductor Number	Min. Bend Radius (in) (cm)	Max Pull Tension (lbs) (kg)	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity Raceway 75C	Allowable Ampacity Raceway 90C
More Options	14 AWG 14 AWG	1 1	0.500 1.27	32 14.51	2.631 3.92	3.170 4.72	0.058 0.09	20 20	25 25
More Options	14 AWG 14 AWG	1 1	0.500 1.27	32 14.51	2.631 3.92	3.170 4.72	0.058 0.09	20 20	25 25
More Options	12 AWG 12 AWG	1 1	0.600 1.52	52 23.59	1.662 2.47	2.002 2.98	0.054 0.08	25 25	30 30
More Options	12 AWG 12 AWG	1 1	0.600 1.52	52 23.59	1.662 2.47	2.002 2.98	0.054 0.08	25 25	30 30
More Options	10 AWG 10 AWG	1 1	0.700 1.78	83 37.65	1.040 1.55	1.253 1.86	0.050 0.07	35 35	40 40
More Options	10 AWG 10 AWG	1 1	0.700 1.78	83 37.65	1.040 1.55	1.253 1.86	0.050 0.07	35 35	40 40

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Size (Strand)	Black	Red	Blue	White	Brown	Orange	Yellow	Green
14 (Solid) 14 (Solid)	956110	956177	956235	956144	956250	557917	956276	956201
14 (7) 14 (7)	951731	955245	955666	955351 955351	955682	557924	955708	955617
12 (Solid) 12 (Solid)	956102	956169	956227	956136	956243	557861	956268	956193
12 (7) 12 (7)	951749	955237	955658	955344 955344	955674	557923	955690	955609
10 (Solid) 10 (Solid)	956094	956151	956219	956128	557929	557930	557931 557931	956185
10 (7) 10 (7)	951756	955229	955641	955336 955336	557920	557921	557922	955591

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
CSA C22.2 No. 38 Thermoset-insulated wires and cables
CSA SUN RES - for Sunlight Resistant rating

Construction

Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Insulation:Cross Linked Polyethylene (XLPE)

Resources

Building Wire Selection Guide

For technical references, whitepapers, and installation resources please refer to: https://www.southwire.com/services/cabletech-support-services