AL 600V-UD HISCORE SINGLE CONDUCTOR

Application

Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts. Especially suited for applications requiring superior resistance to mechanical damage. Rated 90° continuous operation, 130°C emergency overload and short circuit 250°C.

Specifications

measurement

imperial metric

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
309831	0 0	4 AWG 4 AWG	7 7				345 8.76	63 93
309849	0 0	2 AWG 2 AWG	7 7				403 10.24	91 136
309864	0 0	1/0 AWG 1/0 AWG	9 9				512 13.00	147 219
309898	0 0	3/0 AWG 3/0 AWG	17 17				603 15.32	214 319
309880	0 0	4/0 AWG 4/0 AWG	18 18				658 16.71	262 390
309930	0 0	350 KCMIL 350 KCMIL	30 30				831 21.11	423 630
309948	0 0	500 KCMIL 500 KCMIL	37 37				979 24.87	583 868
472407	0 0	1000 KCMIL 1000 KCMIL	61 61				1337 33.96	1120 1667

Standards & References

HI-SCORE single conductor 600 volt secondary UD cable meets or exceeds the following applicable ASTM specifications:

B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.
B-609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

Construction

Conductors are stranded, compressed 1350-H16/H26 aluminum, insulated with a cross-linked polyethylene meeting the requirements of ANSI/ICEA S-81-570. Conductors are durably surface printed for identification.

1350

Resources

There are no downloadable resources for this product.