Armorlite® Type MC Neutral Per Phase
12/2 AWG Copper THHN/THWN Insulated Singles. Dedicated Neutral Conductor for Each Phase Conductor. Green Copper THHN Insulated Grounding Conductor. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor.
Application
Southwire Armorlite® Type MC Cable –Neutral Per Phase is suitable for use as follows:
- Applications affected by harmonics generated from non-linear switching loads, such as computers, variable frequency drives, electrical test equipment, and officeequipment.
- Branch, feeder and service power distribution in commercial, industrial, institutional, and multiresidential buildings.
- Fished or embedded in plaster.
- Concealed or exposed installations.
- Compliance with NEC 210.7 for multiple branch circuits
- Environmental air-handling spaces per NEC 300.22 (C).
- Places of Assembly per NEC 518.4 and theaters per NEC520.5.
- Installation in cable tray and approvedraceways.
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
- Class I Div. 2, Class II Div 2, & Class III Div. 1 HazardousLocations.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 674349 |
4
4
|
14 AWG
14 AWG
|
1
1
|
15
0.38
|
14
14
|
|
499
12.69
|
116
172
|
|
| 554991 |
4
4
|
12 AWG
12 AWG
|
1
1
|
15
0.38
|
12
12
|
|
540
13.73
|
159
237
|
|
| 554990 |
6
6
|
12 AWG
12 AWG
|
1
1
|
15
0.38
|
12
12
|
|
577
14.67
|
211
313
|
|
| 643572 |
8
8
|
12 AWG
12 AWG
|
1
1
|
15
0.38
|
12
12
|
|
665
16.90
|
268
399
|
|
| 674313 |
14
14
|
12 AWG
12 AWG
|
1
1
|
15
0.38
|
12
12
|
|
846
21.50
|
454
675
|
|
| 552996 |
4
4
|
10 AWG
10 AWG
|
1
1
|
20
0.51
|
10
10
|
|
670
17.04
|
274
407
|
|
| 592678 |
6
6
|
10 AWG
10 AWG
|
1
1
|
20
0.51
|
10
10
|
|
679
17.26
|
382
569
|
|
| 554852 |
8
8
|
10 AWG
10 AWG
|
1
1
|
20
0.51
|
10
10
|
|
883
22.44
|
469
698
|
|
| 677655 |
10
10
|
10 AWG
10 AWG
|
1
1
|
20
0.51
|
10
10
|
|
883
22.44
|
506
753
|
|
| 674364 |
12
12
|
10 AWG
10 AWG
|
1
1
|
20
0.51
|
10
10
|
|
946
24.05
|
587
874
|
|
| 647510 |
6
6
|
8 AWG
8 AWG
|
19
19
|
30
0.76
|
8
8
|
|
917
23.29
|
553
823
|
|
| 592736 |
8
8
|
8 AWG
8 AWG
|
19
19
|
30
0.76
|
10
10
|
|
1030
26.17
|
670
997
|
|
| 556287 |
4
4
|
12 AWG
12 AWG
|
1
1
|
15
0.38
|
12
12
|
|
659
16.75
|
240
358
|
|
Standards & References
Southwire Armorlite® Type MC Cable – Neutral Per Phase meets or exceeds the following requirements:
- UL 83
- UL 1569
- UL 1685
- UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
- Federal Specification A-A59544 (formerly J-C-30B)
- NFPA 70 (National Electrical Code), Article 330
- Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
- Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) VerticalCable Tray Flame Test
- REACH/RoHS-2 (Chemical Limit) Compliant
Construction
Southwire Armorlite® Type MC Cable – Neutral Per Phase is constructed with solid soft-drawn copper Type THHN/THWN phase conductors, a dedicated neutral per phase conductor, and an insulated copper grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is applied over the conductors. Aluminum interlocking armor is applied over the cable assembly. An optional overall PVC jacket can be applied over the armor.
Resources
There are no downloadable resources for this product.