SPEC: 25020

CSA TECK 90 CU 5000V NON-SHIELDED TRXLPE POWER CABLE SPEC25020

5000V, Non-Shielded, TRXLPE Insulated (Treeing Retardant), FT4, -40°C, HL (Hazardous Locations), 90°C

Download Category Specifications

Application & Features

Southwire’s Teck 90, 5000V, non-shielded, TRXLPE insulated (treeing resistant) power cable is a CSA approved armoured cable for industrial and commercial medium voltage applications. FT4, -40C, HL , AG14 and 90°C rated for use in harsh Canadian environments. Rated for installation in cable trays, duct banks, direct burial, troughs, hazardous locations, continuous rigid cable supports, and is concrete encaseable.

-40°C - CSA Cold Bend and Impact Temperature
-25°C - Min. Installation Temperature
90°C - Max. Continuous Operating Temperature
140°C for Emergency Overload Temperature
250°C for Short Circuit Temperature

Specifications

Select a set of products below for more information:

	Cond. Size	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Inner Jacket Thickness (mils) (mm)	Diameter Over Armor (in) (cm)	Drain Wire	Jacket Thickness (mils) (mm)	Approx. OD (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)	Max Pull Tension (lbs) (kg)	Min. Bend Radius (in) (cm)
More Options	350 KCMIL 350 KCMIL	37 37	0.661 1.68	90 2.29	60 1.52	1.511 3.84	13x12 13x12	55 1.40	1.621 4.12	2033 3025	2800 1270.06	11.3 28.70
More Options	500 KCMIL 500 KCMIL	37 37	0.789 2.00	90 2.29	60 1.52	1.621 4.12	17x12 17x12	55 1.40	1.731 4.40	2652 3947	4000 1814.37	12.1 30.73
More Options	1000 KCMIL 1000 KCMIL	61 61	1.117 2.84	90 2.29	60 1.52	1.987 5.05	21x12 21x12	55 1.40	2.097 5.33	4569 6799	8000 3628.74	14.6 37.08

* Other conductor sizes and outer jacket colours are available upon request. (#s in brackets represent # of strands / conductor. Number of strands may vary as per CSA standard.)
** Non-Standard sizes are available upon request. Reel sizes are not guaranteed. The factory reserves the right to make changes as necessary to optimize manufacturing requirements.
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity In Air 90C
More Options	350 KCMIL 350 KCMIL	0.031 0.05	0.039 0.06	0.042 0.06	537 537
More Options	500 KCMIL 500 KCMIL	0.022 0.03	0.029 0.04	0.040 0.06	616 616
More Options	1000 KCMIL 1000 KCMIL	0.011 0.02	0.018 0.03	0.036 0.05	813 813

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
CSA C22.2 No. 174 Cables in Hazardous Locations
CSA C22.2 No. 131 Type TECK 90 Cable
CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA HL - for Hazardous Locations rating
CSA SUN RES - for Sunlight Resistant rating
CSA AG14 - Acid Gas Compliance
ICEA S-96-659 (NEMA WC 71) 2001-5000 V Nonshielded Cables
IEEE 383 Flame Test (70,000 btu)
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

Construction

Conductor:Class B stranded copper, compressed or compact, in accordance with ASTM B3 and B8.
Conductor Shield:Extruded semi-conducting thermosetting polymeric layer
Insulation:TRXLPE (tree retardant cross linked polyethylene), Thickness: 0.090 inches (2.3 mm) - nominal, Insulation Level: 100% - ungrounded system, Temperature Rating: 90°C
Concentric Bonding Conductors:Class B, concentric bare copper wire serve
Binder:Polypropylene tape
Inner Jacket:Black PVC, Thickness: No. 2 AWG to No. 1/0 AWG = 0.045” (1.2 mm), No. 2/0 AWG to 1000 kcmil = 0.060” (1.6 mm)
Armor:Aluminum Interlocked Armour (AIA)
Overall Jacket:Orange PVC (optional colours available), Thickness: No. 2 AWG to 400 kcmil = 0.045” (1.2 mm), 500 kcmil to 1000 kcmil = 0.055” (1.4 mm)

Resources

There are no downloadable resources for this product.