Duraclad® Type MC

12-2 STR CU XHHW BLACK/WHITE/GREEN GRND DURACLAD STEEL MC SPL OD 250 FT

Southwire #: 64192601

12/2 AWG Copper THHN/THWN Insulated Singles. Green Copper THHN Insulated Grounding Conductor. UL Listed. 600 Volts. Rated VW-1. Lightweight Steel Interlocked Armor. Also available in Blue Steel Armor.

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

NATURAL

Conductor Color

Packaging

12-2 STR CU XHHW BLACK/WHITE/GREEN GRND DURACLAD STEEL MC SPL OD 250 FT

Application & Features

Southwire Duraclad® Type MC Cable is suitable for use as follows:

Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
Fished or embedded in plaster.
Concealed or exposed installations.
Environmental air-handling spaces per NEC 300.22(C).
Places of Assembly per NEC 518.4 and theaters per NEC 520.5
Installation in cable tray and approved raceways.
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

Size (AWG or kcmil) (mm2)	12 AWG 12 AWG
No. of Conductors	2 2
Stranding	Stranded Stranded
Nom. OD (mils) (mm)	530 13.46	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	174 258	lbs/1000' kgs/km
Size (AWG)	12 12
Ground Size UOM	AWG AWG
Conductor Colors	BLK, WHT, GRN BLK, WHT, GRN

Standards & References

Southwire Duraclad® Type MC Cable meets or exceeds the following requirements:

UL 83
UL 1569
UL 1685
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
Federal Specification A-A-59544
NFPA 70 (National Electrical Code), Article 330
Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) Vertical Cable Tray Flame Test
Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire Duraclad Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped on the assembly. Light weight galvanized steel interlocked armor is applied over the assembly. Blue steel armor is also available.

Resources

There are no downloadable resources for this product.