Alumaflex Riser MC™ Cable Type MC AL Feeder THHN/THWN-2 Conductors

750-4 3E AL THHN BROWN/ORANGE/YELLOW/GRAY/#3/0 GREEN GROUND 600V AIA MCRISER

Southwire #: 64934299

750/4 kcmil AlumaFlex™ THHN/THWN-2 Insulated Singles with 8000 series Triple E™ Aluminum Alloy. Bare AlumaFlex™ Aluminum Alloy Grounding Conductor. UL Listed. 600 Volts. Binder Jacket for Continuous Conductor Support. Lightweight Aluminum Interlocked Armor.

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

NATURAL

Conductor Color

Packaging

Application & Features

Suitable for use as follows:

Riser Cable, vertical applications
Branch, feeder and service power distribution in commercial, industrial, institutional, and multiresidential buildings.
Power, lighting, control, and signal circuits.
Fished or embedded in plaster
Concealed or exposed installations.
Environmental air-handling spaces per NEC 300.22 (C).
Places of Assembly per NEC 518.4 and theaters per NEC 520.5
Installation in cable tray and approved raceways.
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).

Specifications

Size (AWG or kcmil) (mm2)	750 KCMIL 750 KCMIL
No. of Conductors	4 4
Stranding	Solid Solid
Nom. OD (mils) (mm)	3198 81.23	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	4796 7138	lbs/1000' kgs/km
Size (AWG)	3/0 3/0
Ground Size UOM	AWG AWG
Size (AWG)	750 750
Conductor Colors	BROWN/ORANGE/YELLOW/GRAY/#3/0GREEN GROUND BROWN/ORANGE/YELLOW/GRAY/#3/0GREEN GROUND

Standards & References

Southwire AlumaFlex Riser MC™ Cable meets or exceeds the requirements of:

UL 83
UL 1569
UL 1685
ICEA S-95-658 (NEMA WC70)
Federal Specification A-A59544 (formerly J-C-30B)
FT4/IEEE 1202 (70,000 Btu/hr)
NFPA 70 (National Electrical Code), Article 330
Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire AlumaFlex Riser MC™ Cable with Triple E™ Aluminum Alloy is constructed with Type THHN/THWN-2 conductors and a bare equipment grounding conductor. Conductors are AlumaFlex™ 8000 series aluminum alloy compact stranded. A binder tape is wrapped over the conductors and an integral polymeric binder jacket is applied under armor for continuous conductor support. Aluminum interlocking armor is applied snuggly over the assembly. An optional overall PVC Jacket can be applied over the armor.

Ideal for use in vertical high rise applications
Available with aluminum or copper THHN or XHHW conductors
Available in custom constructions and lengths
Polymeric binder jacket over the conductors provides continuous conductor support
Available with Southwire pulling heads and on stacked reels.

Resources

There are no downloadable resources for this product.