High Voltage Cu 230kV Power Cable
Segmental Cu smooth conductor shield, super clean XLPE insulation, true triple extrusion and dry cured, firmly bonded insulation shield, Cu moisture impervious sheath, PE jacket with extruded semi-conductive outer layer.
Application
Predominantly used for underground transmission in conduit systems, suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 230,000 volts or less and at conductor temperatures not to exceed 90°C for normal operation.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 643405 |
1
1
|
3500 KCMIL
3500 KCMIL
|
324
324
|
905
23.00
|
|
|
4812
122.25
|
18194
27076
|
|
| 677929 |
1
1
|
4000 KCMIL
4000 KCMIL
|
464
464
|
905
23.00
|
|
|
5021
127.55
|
19957
29700
|
|
Standards & References
- ICEA S-108-720 AEIC CS9 - And IEC 60840 or 62067 upon request as applicable
Construction
Resources
There are no downloadable resources for this product.