Armorlite® Type MC

12-3 SOL CU THHN BROWN/BROWN-GRAY/GRAY/GREEN AIA MC 600V 1000 FT

Southwire #: 67827402

12/3 AWG THHN/THWN Insulated Singles. Green Insulated Ground. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor.

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLUE

NATURAL

Conductor Color

Packaging

Application & Features

Southwire Armorlite® Type MC Cable is suitable for use as follows:

Branch, feeder and service power distribution in commercial, industrial, institutional, and multiresidential buildings.
Fished or embedded in plaster.
Concealed or exposed installations
Environmental air-handling spaces per NEC 300.22 (C).
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
Installation in cable tray and approved raceways.
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

Size (AWG or kcmil) (mm2)	12 AWG 12 AWG
No. of Conductors	3 3
Stranding	Solid Solid
Nom. OD (mils) (mm)	505 12.84	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	132 196	lbs/1000' kgs/km
Size (AWG)	12 12
Ground Size UOM	AWG AWG
Size (AWG)	12 12
Conductor Colors	BRN, BRN-GRY, GRY, GRN BRN, BRN-GRY, GRY, GRN

Standards & References

Southwire Armorlite® Type MC Cable meets or exceeds the requirements of the following:

UL 83
UL 1569
UL 1685
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
Federal Specification A-A59544 (formerly J-C-30B)
FT4/IEEE 1202 (70,000 Btu/hr) Vertical Cable Tray Flame Test
NFPA 70 (National Electrical Code), Article 330
Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire Armorlite® Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry available in sizes 14 AWG through 2 AWG, and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.

Resources

Cu MC Cable EPD