SPEC: 45413

10-19 CU PV SINGLE LAYER XLP 600V WHITE 2500 FT SPEC45413 56794901

Southwire #: 56794901

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

RED

WHITE

Packaging

Application & Features

Southwire’s 600 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions.

Specifications

Cond. Size	10 AWG 10 AWG
Conductor Number	1 1
Cond. Strands	19 19
Diameter Over Conductor (in) (cm)	0.117 0.30	inch cm
Insulation Thickness (mils) (mm)	60 1.52	mils mm
Approx. OD (in) (cm)	0.231 0.59	inch cm
Copper Weight (lbs/1000') (kgs/km)	32 48	lbs/1000' kgs/km
Approx. Weight (lbs/1000') (kgs/km)	47 70	lbs/1000' kgs/km

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 4703 Standard for Photovoltaic Wire
Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
VW-1 Vertical-Wire Flame Test (Optional)

Construction

Conductor:Stranded bare copper per ASTM B3 and ASTM B8 or B787
Insulation:Cross Linked Polyethylene (XLPE). Alternative colors available upon request (see Table 3 below)

Resources

There are no downloadable resources for this product.