2/0-19 CU 1/C XHHW-2/PVC 1000V SPEC45002 89018199

Southwire #: 89018199

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Packaging

Application & Features

Southwire’s 600 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. CT Rated 1/0 and Larger - Sunlight Resistant - Silicone Free. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Cond. Size	2/0 AWG 2/0 AWG
Conductor Number	1 1
Cond. Strands	19 19
Diameter Over Conductor (in) (cm)	0.405 1.03	inch cm
Insulation Thickness (mils) (mm)	55 1.40	mils mm
Jacket Thickness (mils) (mm)	50 1.27	mils mm
Approx. OD (in) (cm)	0.634 1.61	inch cm
Copper Weight (lbs/1000') (kgs/km)	410 610	lbs/1000' kgs/km
Approx. Weight (lbs/1000') (kgs/km)	526 783	lbs/1000' kgs/km

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
CT USE Sizes 1/0 AWG and Larger

Construction

Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2
Overall Jacket: Polyvinyl Chloride (PVC) Jacket

Resources

There are no downloadable resources for this product.