500-37 CU 1/C XHHW-2/PVC 1000V SPEC45002 89002299

Southwire #: 89002299

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

Packaging

Application & Features

Southwire’s 600 or 1000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. CT Rated 1/0 and Larger - Sunlight Resistant - Silicone Free. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Cond. Size	500 KCMIL 500 KCMIL
Conductor Number	1 1
Cond. Strands	37 37
Diameter Over Conductor (in) (cm)	0.789 2.00	inch cm
Insulation Thickness (mils) (mm)	65 1.65	mils mm
Jacket Thickness (mils) (mm)	75 1.91	mils mm
Approx. OD (in) (cm)	1.060 2.69	inch cm
Copper Weight (lbs/1000') (kgs/km)	1543 2296	lbs/1000' kgs/km
Approx. Weight (lbs/1000') (kgs/km)	1807 2689	lbs/1000' kgs/km

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
CT USE Sizes 1/0 AWG and Larger

Construction

Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Insulation:Cross Linked Polyethylene (XLPE) Type XHHW-2
Overall Jacket:Polyvinyl Chloride (PVC) Jacket

Resources

There are no downloadable resources for this product.