CU XLP TRIPLEX SERVICE DROP

Copper Conductors With Crosslinked Polyethylene Insulation.
Download Category Specifications:
PDF Excel Table

Application

Primarily used for 120 volt overhead service applications such as street lighting, outdoor lighting, and temporary service for construction. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 90°C for crosslinked polyethylene (XLP) insulated conductors.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
110718 3 3 6 AWG 6 AWG 7 7 45 1.14 578 14.70 271 403
110734 3 3 4 AWG 4 AWG 7 7 45 1.14 680 17.28 374 556
110775 3 3 2 AWG 2 AWG 7 7 45 1.14 805 20.46 585 871
110791 3 3 1/0 AWG 1/0 AWG 19 19 60 1.52 1041 26.44 1054 1568
110809 3 3 2/0 AWG 2/0 AWG 19 19 60 1.52 1136 28.86 1318 1961
110825 3 3 4/0 AWG 4/0 AWG 19 19 60 1.52 1365 34.67 2069 3079

Standards & References

  • ASTM B1 Hard-Drawn Copper
  • ASTM B3 Standard Specification for Soft or Annealed Copper Wire
  • ASTM B3 Standard Specification for Soft or Annealed Copper Wire
  • ICEA S-76-474 Standard for Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600V

Construction

  • Conductor: Conductors are stranded, compressed copper
  • Insulation: Cross Linked Polyethylene (XLPE)
  • Messenger: Hard Drawn Copper

Resources

There are no downloadable resources for this product.