2-308 TINNED CU 4/C BLACK/GREEN/WHITE/GREEN/RED/GREEN/BLUE/GREEN TYPE GRHINOFLEX II 2KV BLACK SPEC47208 58652199

Southwire #: 58652199

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

Conductor Color

Packaging

Application & Features

RHINOFLEX^TM Type G cable is a heavy-duty cable for use where flexibility and maximum protection is required. For use with with all portable, temporary, and permanent power applications such as mobile or stationary mining equipment, shuttle cars, mobile drills, pumps, roof bolters, conveyors, and any portable power where equipment grounding is required, It is ideal for use anytime extra-durable, flexible cable is required. Also suitable for continuous submersion in water. Embossed print legend for easy cable identification.

Specifications

Cond. Size	2 AWG 2 AWG
Conductor Number	4 4
Cond. Strands	308 308
Diameter Over Conductor (in) (cm)	0.302 0.77	inch cm
Insulation Thickness (mils) (mm)	60 1.52	mils mm
Diameter Over Insulation (in) (cm)	0.446 1.13	inch cm
Inner Jacket Thickness (mils) (mm)	65 1.65	mils mm
Jacket Thickness (mils) (mm)	80 2.03	mils mm
Approx. OD (in) (cm)	1.480 3.76	inch cm
Approx. Weight (lbs/1000') (kgs/km)	1762 2622	lbs/1000' kgs/km

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines

Construction

Conductor:Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B33/B172
Separator Tape:Non-conducting tape applied between the conductor and insulation to facilitate stripping
Insulation:Ethylene Propylene Rubber (EPR). Color coded black, white, red, orange
Ground Conductors:Four mylar taped, tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172
Filler:Filler as needed
Inner Jacket:Black, mold cured, extra heavy-duty integral fill flame resistant, thermosetting Chlorinated Polyethylene (CPE)
Reinforcement:Reinforcing twine applied between the two jacket layers
Outer Jacket:Black, mold cured, extra heavy-duty, integral fill, flame resistant, thermosetting Chlorinated Polyethylene (CPE). Alternate jacket colors available
Reflective Stripe:Highly visible reflective stripe embedded into the outer jacket to increase safety and help prevent cable runover (optional, contact your sales representative for part number)

Resources

Cu Mining Cable EPD