Alumaflex™ Type MC AL Feeder THHN/THWN-2 Conductors with PVC Jacket

Application

Type MC Cable - "flame retardant sunlight resistant PVC Jacket" is suitable for use as follows:

Suitable for Wet Location per NEC 330.10(11)
Direct burial applications, installation in concrete and where exposed to cinder fills, strong chlorides, caustic alkalis, or vapors of chlorine or of hydrochloricacids
Branch, feeder and service power distribution in commercial, industrial, institutional, and multiresidential buildings
Power, lighting, control, and signal circuits.
Fished or embedded in plaster
Concealed or exposed installations.
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
As aerial cable on a messenger
Installation in cable tray and approved raceways.
Under raised floors for information technology equipment conductors and cables perNEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

measurement

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
552465	3 3	2/0 AWG 2/0 AWG	12 12	50 1.27	4 4		1386 35.21	847 1260
552464	3 3	3/0 AWG 3/0 AWG	16 16	50 1.27	4 4		1477 37.54	963 1433
593086	2 2	4/0 AWG 4/0 AWG	19 19	50 1.27	1/0 1/0		1506 38.25	934 1390
552484	3 3	4/0 AWG 4/0 AWG	19 19	50 1.27	2 2		1722 43.74	1297 1931
554283	4 4	4/0 AWG 4/0 AWG	19 19	50 1.27	2 2		1881 47.79	1649 2453
599377	3 3	250 KCMIL 250 KCMIL	22 22	60 1.52	1/0 1/0		1945 49.42	1609 2394
679730	4 4	250 KCMIL 250 KCMIL	22 22	60 1.52	2 2		2033 51.65	1855 2760
587518	3 3	300 KCMIL 300 KCMIL	21 21	60 1.52	1 1		1975 50.17	1717 2555
679281	2 2	350 KCMIL 350 KCMIL	35 35	60 1.52	250 250		2074 52.69	1629 2425
560766	4 4	350 KCMIL 350 KCMIL	35 35	60 1.52	1/0 1/0		2265 57.54	2399 3570
587515	3 3	400 KCMIL 400 KCMIL	35 35	60 1.52	1 1		2167 55.05	2087 3106
555809	3 3	500 KCMIL 500 KCMIL	35 35	60 1.52	1 1		2333 59.27	2467 3671
554932	4 4	500 KCMIL 500 KCMIL	35 35	60 1.52	3/0 3/0		2589 65.76	3303 4916
560770	4 4	600 KCMIL 600 KCMIL	58 58	70 1.78	3/0 3/0		2828 71.83	3848 5726
555812	3 3	750 KCMIL 750 KCMIL	58 58	70 1.78	1/0 1/0		2786 70.78	3553 5287
554933	4 4	750 KCMIL 750 KCMIL	53 53	70 1.78	3/0 3/0		3061 77.76	4569 6800
678414	4 4	900 KCMIL 900 KCMIL	58 58	70 1.78	1/0 1/0		3308 84.04	5341 7949

Standards & References

Southwire AlumaFlex™ Type MC Cable - PVC Jacketed meets or exceeds the following requirements:

UL 83
UL 1569
UL 1685
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
Federal Specification A-A59544 (formerly J-C-30B)
Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202"(70,000 Btu/hr) Vertical Cable Tray Flame Test
NFPA 70 (National Electrical Code), Article 330
Listed for use in UL 1, 2, and 3 Hour Through-Penetration FirestopSystems
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire AlumaFlex™ Type MC Cable with Triple E™ Aluminum Alloy - PVC Jacketed is constructed with Aluminum Type THHN/THWN-2 conductors rated 90°C wet or dry, and a bare aluminum grounding conductor for sizes 1/0 AWG and larger. The conductors are cabled together and a binder tape is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. A black flame retardant sunlight resistant PVC jacket is applied over the armor. The jacket is available in other colors upon request, subject to economic order quantities.

Resources

There are no downloadable resources for this product.