SPEC 46702 CU Compressed 35kV NLEPR Insulation 133% IL Black SIM-PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial
Type MV-105 Single Conductor Copper, 420 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA
Application
Southwire’s 35KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 890065 |
1
1
|
1/0 AWG
1/0 AWG
|
19
19
|
420
10.67
|
|
|
1480
37.59
|
1250
1860
|
|
| 890082 |
1
1
|
2/0 AWG
2/0 AWG
|
19
19
|
420
10.67
|
|
|
1524
38.71
|
1377
2049
|
|
| 890066 |
1
1
|
4/0 AWG
4/0 AWG
|
19
19
|
420
10.67
|
|
|
1616
41.05
|
1708
2542
|
|
| 890083 |
1
1
|
250 KCMIL
250 KCMIL
|
37
37
|
420
10.67
|
|
|
1728
43.89
|
1984
2952
|
|
| 890067 |
1
1
|
350 KCMIL
350 KCMIL
|
37
37
|
420
10.67
|
|
|
1827
46.41
|
2385
3550
|
|
| 890068 |
1
1
|
500 KCMIL
500 KCMIL
|
37
37
|
420
10.67
|
|
|
1952
49.58
|
2977
4430
|
|
| 890084 |
1
1
|
750 KCMIL
750 KCMIL
|
61
61
|
420
10.67
|
|
|
2164
54.97
|
3973
5912
|
|
| 675797 |
1
1
|
1250 KCMIL
1250 KCMIL
|
91
91
|
420
10.67
|
|
|
2450
62.23
|
5816
8656
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072: Medium-Voltage Power Cables
- UL 1685: FT4 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
- CSA C22.2 No.230: Tray Cables - Rated TC-ER (1/0 AWG and Larger)
- CSA C22.2 No. 2556 / UL 2556: Cable Test Methods
- CSA C68.10: Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 420 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Overall Jacket: Sunlight resistant Polyvinyl Chloride (PVC)
Resources
Related Products
