SPEC 46701 CU Compressed 35kV NLEPR Insulation 100% IL Black SIM-PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial
Type MV-105 Single Conductor Copper, 345 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA
Application
Southwire’s 35KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 555839 |
1
1
|
1/0 AWG
1/0 AWG
|
19
19
|
345
8.76
|
|
|
1330
33.78
|
1073
1597
|
|
| 555847 |
1
1
|
2/0 AWG
2/0 AWG
|
19
19
|
345
8.76
|
|
|
1374
34.90
|
1195
1779
|
|
| 555854 |
1
1
|
3/0 AWG
3/0 AWG
|
19
19
|
345
8.76
|
|
|
1424
36.17
|
1345
2001
|
|
| 555862 |
1
1
|
4/0 AWG
4/0 AWG
|
19
19
|
345
8.76
|
|
|
1480
37.59
|
1527
2273
|
|
| 555870 |
1
1
|
250 KCMIL
250 KCMIL
|
37
37
|
345
8.76
|
|
|
1565
39.75
|
1742
2593
|
|
| 551986 |
1
1
|
350 KCMIL
350 KCMIL
|
37
37
|
345
8.76
|
|
|
1637
41.58
|
2091
3111
|
|
| 555888 |
1
1
|
500 KCMIL
500 KCMIL
|
37
37
|
345
8.76
|
|
|
1802
45.77
|
2744
4083
|
|
| 957316 |
1
1
|
750 KCMIL
750 KCMIL
|
61
61
|
345
8.76
|
|
|
2014
51.16
|
3714
5528
|
|
| 608992 |
1
1
|
1000 KCMIL
1000 KCMIL
|
61
61
|
345
8.76
|
|
|
2163
54.94
|
4624
6881
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072: Medium-Voltage Power Cables
- UL 1685: FT4 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
- CSA C22.2 No.230: Tray Cables - Rated TC-ER (1/0 AWG and Larger)
- CSA C22.2 No. 2556 / UL 2556: Cable Test Methods
- CSA C68.10: Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 345 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Overall Jacket: Polyvinyl Chloride (PVC)
Resources
Related Products
