3/0-19 SD CU SIMpull(TM) T90/TWN75/THHN/MTW WHITE 984 FT

Southwire #: 47198703

Copper Conductor, 600V, Thermoplastic-Insulated Cable, Rated TWN75.

Download Category Specifications

Select Product Specifications

Construction

Outer Jacket / Armor Color

Packaging

SIMpull ® THHN, THWN-2, MTW - (UL) - suitable for dry locations not exceeding 90°C.

For Gasoline and Oil Resistant II applications not to exceed 75°C.
MTW (UL) - suitable for dry locations not exceeding 90°C. For wet locations, Gasoline and Oil Resistant II applications not to exceed 60°C.
T90 Nylon c(UL) - cables are primarily intended for installation in conduit (raceways) as exposed wiring in dry locations not exceeding 90°C. TWN75 c(UL) - suitable for wet or dry locations at not more than 75°C.
The maximum voltage rating for all intended applications is 600 volts.
Minimum installation handling temperature is limited to -25°C. Minimum operating temperature limited to -40°C.

Stock #	47198703 47198703
Size (AWG or kcmil) (mm2)	3/0 AWG 3/0 AWG
No. of Strands	19 19
Insulation Thickness (mils) (mm)	50 1.27	mils mm
Jacket Thickness (mils) (mm)	8 0.20	mils mm
Nom. OD (mils) (mm)	574 14.58	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	579 862	lbs/1000' kgs/km
Allowable Ampacity at 60C	165 165
Allowable Ampacity at 75C	200 200
Allowable Ampacity at 90C	225 225

+ Allowable ampacities are for general use as specified by the Canadian Electrical Code, Part 1, 2015, Table 2

Southwire’s SIMpull® THHN, THWN-2, MTW cables meet or exceed the following requirements:

Southwire’s SIMpull ® THHN, THWN-2, MTW cables are manufactured with annealed (soft) copper conductor and a tough, heat and moisture-resistant thermoplastic polyvinyl chloride (PVC) insulation.
Manufactured using combination unilay stranding.
Copper Conductor
SIMpull ® Insulation

There are no downloadable resources for this product.