4 STR 3E AL (21.2mm2) SIMpull(R) XHHW-2 BLACK 1000 FT
1000 Volts/600 Volts Alumaflex® Brand Aluminum Alloy (AA-8176) Conductor. Cross-linked Polyethylene (XLPE) Insulation. Moisture Resistant High Heat.
Application
Southwire® SIMpull XHHW-2® aluminum conductors are primarily used in conduit or recognized raceways for service and feeder wiring as specified in the National Electrical Code. XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating for XHHW-2 conductors is 1000 volts. Suitable for use in Health Care Facilities per section 517.160 of the NEC where a dielectric constant of 3.5 or less may be specified. This product is designed to be installed without the application of pulling lubricant.
Specifications
| Stock # | 11271401 11271401 | |
| Size (AWG or kcmil) (mm2) | 4 AWG 4 AWG | |
| No. of Strands | 7 7 | |
| Nom. OD (mils) (mm) | 309 7.85 | mils mm |
| Insulation Thickness (mils) (mm) | 45 1.14 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 59 87 | lbs/1000' kgs/km |
| Allowable Ampacity at 60C | 55 55 | |
| Allowable Ampacity at 75C | 65 65 | |
| Allowable Ampacity at 90C | 75 75 | |
| UPC # | 032886541513 032886541513 |
Standards & References
Southwire SIMpull® Aluminum Type XHHW-2 conductors comply with the following:
- ASTM – B800 and B801
- Listed per UL Standard 44
- NOM-ANCE 90° C
- Federal Specification A-A-59544
- National Electrical Code, NFPA 70
- NEMA WC-70 (ICEA S-95-658) Construction Requirements
- Gas & Oil Resistant II
- Sunlight Resistant
- RoHS/Reach Compliant
Construction
Southwire Type XHHW-2 aluminum conductors are Alumaflex® brand AA-8000 series aluminum alloy, compact stranded. The insulation is an abrasion, moisture and heat resistant SIMpull® thermoset cross-linked polyethylene. Marked sunlight resistant.
Resources
Related Products
