2-19 SD CU SIMpull(TM) T90/TWN75/THHN/MTW WHITE 4921 FT SPEC22060 67239403

Southwire #: 67239403

Copper Conductor, 600V, Thermoplastic-Insulated Cable, Rated TWN75.

Download Category Specifications

Select Product Specifications

Construction

Outer Jacket / Armor Color

BLACK

GREEN

WHITE

Packaging

SIMpull ® THHN, THWN-2, MTW - (UL) - suitable for dry locations not exceeding 90°C.

For Gasoline and Oil Resistant II applications not to exceed 75°C.
MTW (UL) - suitable for dry locations not exceeding 90°C. For wet locations, Gasoline and Oil Resistant II applications not to exceed 60°C.
T90 Nylon c(UL) - cables are primarily intended for installation in conduit (raceways) as exposed wiring in dry locations not exceeding 90°C. TWN75 c(UL) - suitable for wet or dry locations at not more than 75°C.
The maximum voltage rating for all intended applications is 600 volts.
Minimum installation handling temperature is limited to -25°C. Minimum operating temperature limited to -40°C.

Cond. Size	2 AWG 2 AWG
Conductor Number	1 1
Cond. Strands	19 19
Diameter Over Conductor (in) (cm)	0.286 0.73	inch cm
Insulation Thickness (mils) (mm)	40 1.02	mils mm
Jacket Thickness (mils) (mm)	5 0.13	mils mm
Approx. OD (in) (cm)	0.384 0.98	inch cm
Copper Weight (lbs/1000') (kgs/km)	204 304	lbs/1000' kgs/km
Approx. Weight (lbs/1000') (kgs/km)	236 351	lbs/1000' kgs/km

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Southwire’s SIMpull® THHN, THWN-2, MTW cables meet or exceed the following requirements:

Southwire’s SIMpull ® THHN, THWN-2, MTW cables are manufactured with annealed (soft) copper conductor and a tough, heat and moisture-resistant thermoplastic polyvinyl chloride (PVC) insulation.
Manufactured using combination unilay stranding.
Copper Conductor
SIMpull ® Insulation