SPEC 46026 CU Compressed NLEPR Insulation 100% IL AIA PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial
Type MV-105 Three Conductor Copper, 90 Mils Ethylene Propylene Rubber (EPR) Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket. Silicone Free
Application
Southwire’s 2.4KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 130°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -40°C for cold bend and cold impact and marked with "LTGG" when CSA listed or dual UL/CSA listed. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 890086 |
3
3
|
2 AWG
2 AWG
|
7
7
|
90
2.29
|
6
6
|
|
1393
35.40
|
1278
1902
|
|
| 606467 |
3
3
|
1/0 AWG
1/0 AWG
|
19
19
|
90
2.29
|
4
4
|
|
1699
43.16
|
1918
2855
|
|
| 552212 |
3
3
|
2/0 AWG
2/0 AWG
|
19
19
|
90
2.29
|
4
4
|
|
1796
45.63
|
2258
3360
|
|
| 552213 |
3
3
|
4/0 AWG
4/0 AWG
|
19
19
|
90
2.29
|
3
3
|
|
1991
50.57
|
3119
4641
|
|
| 551526 |
3
3
|
350 KCMIL
350 KCMIL
|
37
37
|
90
2.29
|
2
2
|
|
2315
58.80
|
4729
7037
|
|
| 890645 |
3
3
|
500 KCMIL
500 KCMIL
|
37
37
|
90
2.29
|
1
1
|
|
2619
66.52
|
6483
9648
|
|
| 552256 |
3
3
|
750 KCMIL
750 KCMIL
|
61
61
|
90
2.29
|
1/0
1/0
|
|
3085
78.38
|
9218
13718
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072: Medium-Voltage Power Cables
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-96-659: (NEMA WC 71) 2001-5000 V Nonshielded Cables
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 90 Mils Ethylene Propylene Rubber (EPR)
- Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Filler: Wax paper filler
- Binder: Polypropylene tape
- Armor: Aluminum Interlocked Armor (AIA)
- Overall Jacket: Polyvinyl Chloride (PVC)
Resources
There are no downloadable resources for this product.