4/0-19 3/C CU TR-XLPE TECK90 5KV N/S AIA ORANGE PVC JKT
Southwire #: 57741899
Download Category Specifications
Excel Table
Application
Southwire’s Teck 90, 5000V, non-shielded, TRXLPE insulated (treeing resistant) power cable is a CSA approved armoured cable for industrial and commercial medium voltage applications. FT4, -40°C, HL, AG14 and 90°C rated for use in harsh Canadian environments. Rated for installation in cable trays, duct banks, direct burial, troughs, hazardous locations, continuous rigid cable supports, and is concrete encaseable.
- -40°C - CSA Cold Bend and Impact Temperature -25°C - Min. Installation Temperature 90°C - Max. Continuous Operating Temperature 140°C for Emergency Overload Temperature 250°C for Short Circuit Temperature
Specifications
| Stock # | 57741899 57741899 | |
| No. of Conductors | 3 3 | |
| Size (AWG or kcmil) (mm2) | 4/0 AWG 4/0 AWG | |
| No. of Strands | 19 19 | |
| Insulation Thickness (mils) (mm) | 90 2.29 | mils mm |
| Size (AWG) | 4 4 | |
| Nom. OD (mils) (mm) | 2245 57.04 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 3449 5132 | lbs/1000' kgs/km |
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- CSA C22.2 No. 174: Cables in Hazardous Locations
- CSA C22.2 No. 131: Type TECK 90 Cable
- CSA C22.2 No. 2556 & No. 0.3: Wire and Cable Test Methods
- CSA: LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
- CSA: HL - for Hazardous Locations rating
- CSA: SUN RES - for Sunlight Resistant rating
- CSA: AG14 - Acid Gas Compliance
- ICEA S-96-659: (NEMA WC 71) 2001-5000 V Nonshielded Cables
- IEEE 383: Flame Test (70,000 btu)
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
- FT1: Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
Construction
- Conductor: Class B stranded copper, compressed or compact, in accordance with ASTM B3 and B8.
- Conductor Shield: Extruded semi-conducting thermosetting polymeric layer
- Insulation: TRXLPE (cross-linked polyethylene), Thickness: 0.090” (2.3 mm) - nominal, 90°C
- Grounding Conductor: Class B compressed or compact stranded bare copper, in accordance with ASTM B3 and B8
- Binder: Polypropylene tape
- Inner Jacket: Black PVC, Thickness: No. 2 AWG to No. 3/0 AWG = 0.080” (2.0 mm); No. 4/0 AWG to 500 kcmil = 0.110” (2.8 mm); 750 kcmil to 1000 kcmil = 0.140” (3.6 mm)
- Armor: Aluminum Interlocked Armour (AIA)
- Overall Jacket: Orange PVC (optional colours available), Thickness: No. 2 AWG to 250 kcmil = 0.060” (1.5 mm); 350 kcmil to 750 kcmil = 0.075” (1.9 mm); 1000 kcmil = 0.090” (2.3 mm)
Resources
There are no downloadable resources for this product.