SPEC 25031 CSA TECK 90 CU 3/C 5000V NON-SHIELDED TRXLPE POWER CABLE

5000V, Non-Shielded, TRXLPE Insulated, FT4, -40°C, HL (Hazardous Locations), AG14 & 90°C

Download Category Specifications

Application

Southwire’s Teck 90, 5000V, non-shielded, TRXLPE insulated (treeing resistant) power cable is a CSA approved armoured cable for industrial and commercial medium voltage applications. FT4, -40°C, HL, AG14 and 90°C rated for use in harsh Canadian environments. Rated for installation in cable trays, duct banks, direct burial, troughs, hazardous locations, continuous rigid cable supports, and is concrete encaseable.

-40°C - CSA Cold Bend and Impact Temperature -25°C - Min. Installation Temperature 90°C - Max. Continuous Operating Temperature 140°C for Emergency Overload Temperature 250°C for Short Circuit Temperature

Specifications

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil) (mm2)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
573334	3 3	2 AWG 2 AWG	7 7	90 2.29	6 6		1695 43.06	1523 2267
586789	3 3	1/0 AWG 1/0 AWG	19 19	90 2.29	6 6		1874 47.61	2011 2993
577418	3 3	4/0 AWG 4/0 AWG	19 19	90 2.29	4 4		2245 57.04	3449 5132
568924	3 3	250 KCMIL 250 KCMIL	37 37	90 2.29	4 4		2414 61.33	3981 5925
580964	3 3	350 KCMIL 350 KCMIL	37 37	90 2.29	3 3		2593 65.88	5096 7583
568927	3 3	500 KCMIL 500 KCMIL	37 37	90 2.29	3 3		2863 72.74	6713 9991
582272	3 3	750 KCMIL 750 KCMIL	61 61	90 2.29	2 2		3420 86.89	9801 14586

Standards & References

ASTM B3: Soft or Annealed Copper Wire
ASTM B8: Concentric-Lay-Stranded Copper Conductors
CSA C22.2 No. 174: Cables in Hazardous Locations
CSA C22.2 No. 131: Type TECK 90 Cable
CSA C22.2 No. 2556 & No. 0.3: Wire and Cable Test Methods
CSA: LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA: HL - for Hazardous Locations rating
CSA: SUN RES - for Sunlight Resistant rating
CSA: AG14 - Acid Gas Compliance
ICEA S-96-659: (NEMA WC 71) 2001-5000 V Nonshielded Cables
IEEE 383: Flame Test (70,000 btu)
IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
FT1: Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

Construction

Conductor: Class B stranded copper, compressed or compact, in accordance with ASTM B3 and B8.
Conductor Shield: Extruded semi-conducting thermosetting polymeric layer
Insulation: TRXLPE (cross-linked polyethylene), Thickness: 0.090” (2.3 mm) - nominal, 90°C
Grounding Conductor: Class B compressed or compact stranded bare copper, in accordance with ASTM B3 and B8
Binder: Polypropylene tape
Inner Jacket: Black PVC, Thickness: No. 2 AWG to No. 3/0 AWG = 0.080” (2.0 mm); No. 4/0 AWG to 500 kcmil = 0.110” (2.8 mm); 750 kcmil to 1000 kcmil = 0.140” (3.6 mm)
Armor: Aluminum Interlocked Armour (AIA)
Overall Jacket: Orange PVC (optional colours available), Thickness: No. 2 AWG to 250 kcmil = 0.060” (1.5 mm); 350 kcmil to 750 kcmil = 0.075” (1.9 mm); 1000 kcmil = 0.090” (2.3 mm)

Resources

There are no downloadable resources for this product.