AL 600V-UD SINGLE CONDUCTOR

Aluminum Conductor. Cross-linked Polyethylene (XLP) Insulation.
Download Category Specifications:
PDF Excel Table

Application

Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
145391 0 0 6 AWG 6 AWG 7 7 60 1.52 298 7.57 44 65
105437 0 0 4 AWG 4 AWG 7 7 60 1.52 344 8.75 62 92
105445 0 0 2 AWG 2 AWG 7 7 60 1.52 403 10.24 91 135
105452 0 0 1 AWG 1 AWG 9 9 80 2.03 473 12.01 122 181
105460 0 0 1/0 AWG 1/0 AWG 9 9 80 2.03 512 13.00 146 218
105478 0 0 2/0 AWG 2/0 AWG 11 11 80 2.03 555 14.10 177 263
105486 0 0 3/0 AWG 3/0 AWG 17 17 80 2.03 603 15.32 214 318
105494 0 0 4/0 AWG 4/0 AWG 18 18 80 2.03 658 16.71 261 389
161877 0 0 250 KCMIL 250 KCMIL 22 22 95 2.41 732 18.59 317 472
105502 0 0 300 KCMIL 300 KCMIL 37 37 95 2.41 784 19.91 368 548
105510 0 0 350 KCMIL 350 KCMIL 30 30 95 2.41 831 21.11 422 628
105528 0 0 500 KCMIL 500 KCMIL 37 37 95 2.41 979 24.87 582 866
105536 0 0 600 KCMIL 600 KCMIL 61 61 110 2.79 1086 27.58 704 1048
105551 0 0 750 KCMIL 750 KCMIL 61 61 110 2.79 1188 30.18 861 1281
178475 0 0 1000 KCMIL 1000 KCMIL 61 61 110 2.79 1337 33.97 1118 1664

Standards & References

Southwire's single conductor 600 volt secondary UD cable meets or exceeds the following applicable ASTM specifications:

  • B-230 Aluminum 1350-H19 Wire for Electrical Purposes.
  • B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.

Construction

Conductors are stranded, compressed 1350-H19, H16 or H26 aluminum, insulated with vulcanized interlinked polyethylene (VIP 1 ), Southwire's cross-linked polyethylene.

  • 1350

Resources

There are no downloadable resources for this product.