AL 600V-UD HISCORE QUADRUPLEX

Application

Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts. Especially suited for applications requiring superior resistance to mechanical damage. Rated 90°C continuous operation, 130°C emergency overload and short circuit 250°C.

Specifications

measurement

imperial metric

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
308577	4 4	2 AWG 2 AWG	7 7				972 24.71	338 504
308635	4 4	3/0 AWG 3/0 AWG	17 17				1455 36.97	798 1187
308650	4 4	4/0 AWG 4/0 AWG	18 18				1588 40.35	973 1449
308676	4 4	350 KCMIL 350 KCMIL	30 30				2006 50.95	1547 2302
310797	4 4	500 KCMIL 500 KCMIL	37 37				2363 60.03	2194 3266

Standards & References

HI-SCORE quadruplex 600 volt secondary UD cable meets or exceeds the following applicable ASTM specifications:

B-609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes.
B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.

Construction

Conductors are stranded, compressed 1350-H16/H26 aluminum, insulated with a cross-linked polyethylene meeting the requirements of ANSI/ICEA S-81-570. Neutrals are triple yellow extruded stripe. Cables with "YES" neutrals have sequential footage markers. Conductors are durably surface printed for identification. Three phase conductors and one neutral conductor are cabled to produce the quadruplex cable configuration. Conductors are also available paralleled.

1350

Resources

There are no downloadable resources for this product.