Southwire’s 600 or 1000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. CT Rated 1/0 and Larger - Sunlight Resistant - Silicone Free
Conductor | Ground Wire | ||||||||
No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
560397 |
1
1
|
1/0 AWG
1/0 AWG
|
10
10
|
55
1.40
|
|
|
458
11.63
|
145
216
|
|
560362 |
1
1
|
250 KCMIL
250 KCMIL
|
22
22
|
65
1.65
|
|
|
660
16.76
|
313
466
|
|
560363 |
1
1
|
350 KCMIL
350 KCMIL
|
35
35
|
65
1.65
|
|
|
756
19.20
|
421
627
|
|
560381 |
1
1
|
750 KCMIL
750 KCMIL
|
58
58
|
80
2.03
|
|
|
1080
27.43
|
871
1296
|
|