SPEC 45007 AL 600V XLPE Insulation XHHW-2. CT Rated 1/0 and Larger - Sunlight Resistant - Silicone Free

Power Cable 600 or 1000 Volt Single Conductor Aluminum, Cross Linked Polyethylene (XLPE) insulation XHHW-2. CT Rated 1/0 and Larger - Sunlight Resistant - Silicone Free

Download Category Specifications

Application

Southwire’s 600 or 1000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. CT Rated 1/0 and Larger - Sunlight Resistant - Silicone Free

Specifications

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil) (mm2)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
560397	1 1	1/0 AWG 1/0 AWG	10 10	55 1.40			458 11.63	145 216
560362	1 1	250 KCMIL 250 KCMIL	22 22	65 1.65			660 16.76	313 466
560363	1 1	350 KCMIL 350 KCMIL	35 35	65 1.65			756 19.20	421 627
560381	1 1	750 KCMIL 750 KCMIL	58 58	80 2.03			1080 27.43	871 1296

Standards & References

ASTM B801: Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
ASTM B836: Compact Rounded Stranded Aluminum Conductors
UL 44: Thermoset-Insulated Wires and Cables
UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
CT USE: Sizes 1/0 AWG and Larger
VW-1: (Vertical-Wire) Flame Test