4/0-19 SD CU SIMpull(TM) T90/TWN75/THHN/MTW WHITE 984 FT SPEC22060 67782003

Southwire #: 67782003

Copper Conductor, 600V, Thermoplastic-Insulated Cable, Rated TWN75.

Download Category Specifications

Select Product Specifications

Construction

Outer Jacket / Armor Color

WHITE

Packaging

SIMpull ® THHN, THWN-2, MTW - (UL) - suitable for dry locations not exceeding 90°C.

For Gasoline and Oil Resistant II applications not to exceed 75°C.
MTW (UL) - suitable for dry locations not exceeding 90°C. For wet locations, Gasoline and Oil Resistant II applications not to exceed 60°C.
T90 Nylon c(UL) - cables are primarily intended for installation in conduit (raceways) as exposed wiring in dry locations not exceeding 90°C. TWN75 c(UL) - suitable for wet or dry locations at not more than 75°C.
The maximum voltage rating for all intended applications is 600 volts.
Minimum installation handling temperature is limited to -25°C. Minimum operating temperature limited to -40°C.

Cond. Size	4/0 AWG 4/0 AWG
Conductor Number	1 1
Cond. Strands	19 19
Diameter Over Conductor (in) (cm)	0.512 1.30	inch cm
Insulation Thickness (mils) (mm)	50 1.27	mils mm
Jacket Thickness (mils) (mm)	8 0.20	mils mm
Approx. OD (in) (cm)	0.630 1.60	inch cm
Copper Weight (lbs/1000') (kgs/km)	655 975	lbs/1000' kgs/km
Approx. Weight (lbs/1000') (kgs/km)	723 1076	lbs/1000' kgs/km

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Southwire’s SIMpull® THHN, THWN-2, MTW cables meet or exceed the following requirements:

Southwire’s SIMpull ® THHN, THWN-2, MTW cables are manufactured with annealed (soft) copper conductor and a tough, heat and moisture-resistant thermoplastic polyvinyl chloride (PVC) insulation.
Manufactured using combination unilay stranding.
Copper Conductor
SIMpull ® Insulation