Bazaarvoice SAP Hybris Integration Version 2.8.2
Used once on one cable. Went to use again, and the screen lights up but is blank or the 4 and 8 come on and blink. Changed batteries and same. What can be done to fix this issue? This is my first experience with Southwire and so far not a good one.
Asked by: Ranger1985
There may be a problem with that particular tester. Please feel free to contact our customer service team and request a replacement unit at Southwirecustomerservice@southwire.com. Sorry for any inconvenience this has caused!
Answered by: Southwire1
Date published: 2021-07-30
I need to trace a data cable from a PC back to a LAN switch. When connecting the M400TP @ PC patch cable, w/ switch end connected to switch, should the warble be silenced when connected? Using a wand, as soon as patch cable is unplugged, warble returns.
Asked by: Pat61
When the signal stops being generated, is the cable connected into the switch? I would try removing that from the switch end and try picking the signal up again. If the cable is plugged into the switch while sending a tone that may nullify the tone.
Answered by: SW Tools
Date published: 2020-12-11
Can I buy just the small generator on the end?
Asked by: Protasis
Please see the link below to our Where to Buy page or call 855-798-6657 and a member of our team can help you find a distributor in your area!
http://www.southwiretools.com/tools/basic/wheretobuy
Answered by: SW Tools
Date published: 2020-06-22
Is this test set capable of identify High RF evironment?
Asked by: Keith Neff
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-10
How can I use the tester to test data cables
Asked by: Randy305
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-10
Hello. What is the maximum length installed cable that this unit can test? Thank you.
Asked by: jd70
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-12-11
What is the maximum range of the remote?
Asked by: KBrz
Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2024-05-05
I just started have any issue with my southwire m550 rj45 terminals
The 1-2,3-6,4-5,7-8, and short are illuminated the S is blinking.
I even tried it on a new data cable.
Can you help me
Asked by: Petea517
We would have the M550 replaced. It is likely providing false readings. please contact our team at 855-798-6657 or email at CCI.ConsumerSupport@southwire.com and we will be happy to help.
Answered by: Southwire
Date published: 2019-12-12
Bazaarvoice SAP Hybris Integration Version 2.8.2
