Bazaarvoice SAP Hybris Integration Version 2.8.2
Does this work on older pushmatic circuit breakers?
Asked by: Fonz
This product has not thoroughly been tested on older pushmatic circuit breakers, unfortunately. The 41210S will send a small amount of mA through a non-energized circuit which can be traced through the end of the circuit.
Answered by: SouthwireSupport
Date published: 2021-05-13
Does this work on older style breaker panels?
Asked by: Wrenchman
Yes, it should work on all styles.
Answered by: Southwire
Date published: 2021-03-02
The Southwire 41210S GFCI Test will trip a receptacle GFCI but NOT a GFCI that is integrated with a breaker? Is this right?
Asked by: BonanzaNC
Hello. Yes, all Southwire products that contain a GFCI test button ( 41151S Voltage Tester, 40022S GFCI Receptacle Tester, and 41210S Circuit Breaker Finder with GFCI Tester) will trip a GFCI circuit regardless of whether it is protected by a GFCI outlet/receptacle or a GFCI or GFCI/AFCI circuit breaker in the load center. All of the GFCI testers that I have listed above work the same and will trip the breaker.
Answered by: SW Tools
Date published: 2023-10-07
Can this Amplifier Probe be used with the M300P in place of the T120AP? In some literature for the M300P it says can be used with any amplifier probe and other places it specifies the T120AP which isn't available locally.
Asked by: Mike M
The Circuit Breaker Finder cannot be used with the M300P.
Answered by: SW Tools
Date published: 2020-06-12
When using my tester the receiver will not change from red to green. It was working correctly the last time used, several weeks ago. I have tried a new battery.
Asked by: Wineguy
We are happy to help! Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2020-04-10
Will this work on any style/make of circuit breaker? What if outlet your testing is through power strip or surge protector?
Asked by: 512ATX
We are happy to help! Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2020-04-06
What about the pincher leads
Asked by: Christoher
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-12-30
Does it work on unenergized cicuits. Can I use it with the power off
Asked by: Dvcrss
We are happy to help! Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2023-10-07
Bazaarvoice SAP Hybris Integration Version 2.8.2
