Bazaarvoice SAP Hybris Integration Version 2.8.2
How do you change the batteries?
Asked by: WayneW
Please see the link below to the operating manual for the 40130N. When pressing down on the release tab, we would recommend a small flat head driver for easier access to the tab.
http://www.southwiretools.com/tools/file.get.do?file_id=262
Answered by: swtools
Date published: 2017-11-02
How do you install the batteries? Can’t find the access point
Asked by: Davyboy
Once the tab has been pressed down, you should be able to separate the back portion of the tester from the main body.
Answered by: swtools
Date published: 2017-11-18
I have a 40120 n dual range ac voltage detector and it's not working how do I fix it
Asked by: markdonen
Please contact our product team at 855-798-6657 and they can assist you in fixing this.
Answered by: swtools
Date published: 2018-05-19
I have a 4013N the power switch does not work all the time. Sometimes it comes on sometimes it doesn't
Is here a warranty on this product?
Asked by: FM592
Yes, there is a warranty on this product. Please contact our customer service team at 1-855-798-6657 and we will assist you. Thank you.
Answered by: SouthwireTools
Date published: 2017-08-20
Can believe it, no instruction on where the battery goes? Do I remove the Phillip screw in the little hole?
Asked by: Arr62
Please email us at ToolCSN@southwire.com, and we will send you the instruction manual. Thank you.
Answered by: SouthwireTools
Date published: 2018-05-19
I got a 40150N, brand new, and the battery cap will not twist off to put the batteries in.
Asked by: Sarahsunshine
The cap could potentially have been overtightened. If you can’t twist the cap off, we can send you a new unit immediately.
Answered by: SouthwireTools
Date published: 2017-08-18
how do you open to add batteries?
Asked by: dalg
Please contact customer service at 1-855-798-6657 and they will send you an operating manual with battery replacement instructions. Thank you.
Answered by: SouthwireTools
Date published: 2017-12-24
Please explain what it means if the reader goes back and forth between indicating whether a wire is hot or not. The batteries are good, but it does this repeatedly.
Asked by: SweetieBJB
We'd like to connect you with a specialist to learn more about this situation. Please contact our customer service team at 1-855-798-6657 and they will assist you. Thank you.
Answered by: SouthwireTools
Date published: 2017-01-11
We're putting in a new dimmer and we only have all black wires leading into the dimmer along with the ground wire what tool do we need to test for the live wire?
Asked by: Barbara
The safest way to find a live wire is by using a meter. The meter will be able to give you an actual voltage reading.
Answered by: SouthwireTools
Date published: 2016-12-09
Can tester be used for Christmas tree lights
Asked by: Garry
Garry, Please contact our customer service team at 1-855-798-6657 so that we can learn more about this situation.
Answered by: SouthwireTools
Date published: 2016-12-09
Does this work on 12 volt system also
Asked by: Zickle
This tester is designed to detect AC voltages between 50 volts and 1000 volts.
Answered by: SouthwireTools
Date published: 2017-01-27
How do I change the batteries on my tester?
Asked by: Tommy G
To change the batteries on the 40130N NCV, gently apply a bending force downward near the top of the device until you hear a click. Then pull the top of the away from the barrel to expose the battery. Please follow this link to find the device on our website: www.southwiretools.com/tools/tools/40130N. Download the owner's manual and view the diagram.
Answered by: SouthwireTools
Date published: 2016-10-24
have had it about a year and just changed the battery - but it dies not work??
What is wrong with this tester? the light on the end works
Asked by: jdog
Please call our customer service team at 1-855-798-6657 and they will connect you with a product manager to assist with this issue.
Answered by: SouthwireTools
Date published: 2016-10-20
I'm having an issue with some old wiring. The tester indicates a hot wire, but beeps very rapidly, could this indicate a short or incomplete circuit?
Asked by: manda
Manda, Please call our customer service team at 1-855-798-6657 so that a member of our team can learn more about your specific issue and assist you.
Answered by: SouthwireTools
Date published: 2016-09-15
40110N. I own it and my understanding is it is recalled directions on sending it back .
Asked by: Jimmy1967
Jimmy, Please call our customer service team at 1-855-798-6657 and they will assist you with this.
Answered by: SouthwireTools
Date published: 2016-09-13
Has this unit been recalled?
Asked by: Danbrew21147
No, the 40110N and 40120N were the recalled units.
Answered by: SouthwireTools
Date published: 2017-11-04
My 40120N AC dual voltage detector stopped working. I replaced the batteries but still does not work. What am I doing wrong? Does this device have a warranty?
Asked by: Norm
Please call our customer service team at 1-855-798-6657 and they will assist with this.
Answered by: SouthwireTools
Date published: 2016-09-01
Where is this made ?
Asked by: BillT
Bill, This is not one of our American-Made Products.
Answered by: SouthwireTools
Date published: 2016-08-18
Can I buy it here on line?? How much is it?
Asked by: Southie
We sell through retailers and distributors. Please call our customer service team at 1-855-798-6657 to receive pricing in your area. They will also help you find a retailer or distributor near you, or supply you with a list of our online retailers.
Answered by: SouthwireTools
Date published: 2016-08-11
How much is this
Asked by: Southie
Please call our customer service team at 1-855-798-6657 to receive pricing in your area.
Answered by: SouthwireTools
Date published: 2016-08-12
Bazaarvoice SAP Hybris Integration Version 2.8.2
