6-273 CU 3/C THHN BK/RD/BU 8-168 GG PVC JKT TYPE TC-ER 600V/AWM 20886 1000V SPEC45028 64894799

Southwire's 600 Volt Power Drop Cables conform to NFPA 79 and are suited for use in wet and dry areas, conduits, ducts, troughs, trays (TC-ER per NEC 336.10), direct burial and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 75°C in wet locations and 90°C in dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, Division 2 hazardous locations per NEC Article 501 and 502. Southwire's 600 Volt Power Drop Cable is ideal for use in power feed drop applications.

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
• ASTM B174 Standard Specification for Bunch-Stranded Copper
• UL 509 Bus Drop Cable
• UL 758 Standard for Appliance Wiring Material Style 20886
• UL 1063 Machine Tool Wiring (MTW)
• UL 1277 TC-ER
• UL 2277 Type WTTC
• CSA C22.2 No. 75 Thermoplastic Insulated Wires and Cables
• IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
• CE/RoHS-2 – The CE Marking has been applied solely to express the conformance to the material restrictions identified in the RoHS-2 (2011/65/EU) Directive