Armorlite® Type MC Circuit PVC Jacketed

Suitable for use as follows:

Download Category Specifications

Application & Features

12/2 AWG THHN/THWN Insulated Singles. Green Insulated Ground. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor. Sunlight Resistant Overall PVC Jacket.

Suitable for Wet Location per NEC 330.10(11)
Branch, feeder and service power distribution in commercial, industrial, institutional, and multiresidential buildings.
Fished or embedded in plaster.
Concealed or exposed installations
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
Installation in cable tray, approved raceways, or as aerial cable on a messenger
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

Specifications

Select a set of products below for more information:

	Conductor					Ground Wire		Neutral Wire
	Size (AWG or kcmil) (mm2)	No. of Conductors	Stranding	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Size (AWG)	Ground Size UOM	Size (AWG)	Conductor Colors
More Options	10 AWG 10 AWG	2 2	Solid Solid	657 16.69	229 341	10 10	AWG AWG	10 10	YLW/GRY/GRN YLW/GRY/GRN
More Options	10 AWG 10 AWG	3 3	Solid Solid	696 17.68	276 410	10 10	AWG AWG		BRN/ORG/YLW/GRN BRN/ORG/YLW/GRN

Standards & References

Southwire's Armorlite® Type MC Cable – PVC Jacketed meets or exceeds the following requirements:

UL 83, 1569, and 1685
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
Federal Specification A-A59544 (formerly J-C-30B)
NFPA 70 (National Electrical Code), Article 330
Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) Vertical Cable Tray Flame Test
REACH/RoHS-2 (Chemical Limit) Compliant

Construction

Southwire Armorlite® Type MC Cable - PVC Jacketed is constructed with soft-drawn, copper Type THHN/THWN conductors rated 90°C dry/ 75°C wet, and a green insulated grounding conductor. The conductors are cabled together and a binder tape is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. A black sunlight resistant, flame retardant PVC jacket is applied over the armor. Print legend is included on the binder tape as well as the overall PVC jacket. The jacket is available in other colors upon request subject to economic order quantities.

Resources

There are no downloadable resources for this product.